All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle

(2 customer reviews)
Availability:

In stock


SKU: 422131

This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the thermistor, heater block, 0.2 mm Nozzle,  sleeving, cooling fan with holder.

 499.00

(inc GST)

₹ 422.88 (+18% GST extra)

In stock

Select below products to add together

0.1-1.0mm Mixed 3D Printer Nozzle Cleaning Drill Bit Kit for MK7 MK8RepRap 10Pcs ₹ 349

New Price: ₹ 499


Purchase this product now and earn 5 Robu Points!
Brand: Generic
Category: 3D Printer Extruder Kit

This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the old thermistor, heater block, sleeving, cooling fan with holder.

The v6 HotEnd allows you to print a wide variety of materials, from soft and flexible to sturdy and strong. This is possible due to the PTFE (Polytetrafluoroethylene) liner tube through the hotend that you can extend into your extruder – this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments. This technology opens new doors for your 3D printing aspirations.

With High-Temperature Performance, you can print with high-temp materials like Polycarbonate and Nylon – this also eliminates HotEnd meltdown failures that are common with PTFE designs. Even though the v6 has a PTFE liner inside the hotend the liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. Basically, this design is really in-tune with all the elements, so your prints will come out crisp and accurate.

The v6 has cut back on a bunch of bulk. This clean-cut version’s overall length is only 62mm, and there are significant reductions in the X/Y dimensions by using the new injection moulded fan duct.

Are you eager to start printing right away? Good. So are we – and that’s why here at MatterHackers we praise the v6 HotEnd. No adhesives, Kapton tape, or soldering is needed to get started. The new v6 simply locks into place with a little screw, high-temp glass sleeving is used to insulate the thermistor legs. This makes installing the hotend (as well as removing) a quick and smooth process compared to earlier methods involving various adhesives. The parts of the hotend just screw together, and the fan duct naturally clips in – this can be manipulated in different ways to suit your setup preference.


Package Includes:

1 x All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle

This kit contains:

1  x Aluminium Heatsink (Contains embedded fitting for tubing in 1.75mm)

1 Stainless Steel Heatbreak

1 x Brass Nozzle (0.2 mm)

1  x Aluminium Heater Block

1 x 100K Semitec NTC thermistor

1 x 12v 30 x 30 x 10mm Cooling fan with Fan Duct

1 x High-Temperature Fiberglass Wire – for Thermistor (150mm)

Filament Diameter (mm)

1.75

Nozzle Diameter (mm)

0.2

Cable Length (cm)

30

Length (mm)

75

Width (mm)

28

Height (mm)

37

Weight (gm)

74

Shipment Weight

0.08 kg

Shipment Dimensions

15 × 5 × 5 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 2 reviews

5.0 overall
2
0
0
0
0

Add a review

  1. bhavin192 (verified owner)

    The 0.2mm nozzle is not easy to work with, it gets clogged more often, so make sure you get an extra 0.4mm nozzle as well. The fan holder is a bit loose, needs some hot glue. Overall the product quality is really good.

    bhavin192

  2. ranjithkuruveli (verified owner)

    Excellent quality. Happy with the product 😊

    ranjithkuruveli

Questions and answers of the customers

  1. 0 votes
  2. 0 votes
    There are no answers for this question yet. Answer now
  3. 0 votes
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions

You may also like…