Arducam High Quality IR-CUT Camera for Jetson Nano/Xavier NX, 12.3MP 1/2.3 Inch IMX477 HQ Camera Module with 6mm CS Lens

This Arducam module uses the same 12MP IMX477 image sensor as the Raspberry Pi High Quality Camera, but offers a mechanical IR cut-off filter switched automatically based on light condition. The official RPi HQ camera is not sensitive to infrared, and there won’t be a NoIR version. On the contrary, this Arducam camera module not only offers sensitivity to infrared but also keeps the natural feeling during daylight. It’s fully compatible with Jetson Nano/Xavier NX with a camera connector.

Useful link:

To use this camera, please follow this tutorial for hardware setup, driver installation and software setup.

Specifications:

• Camera

1. Sensor: IMX477
2. Optical Format: 1/2.3″ (diagonal 7.857mm)
3. Resolution: 4056(H) x 3040(V) 12.3MP
4. Pixel Size: 1.55um x 1.55um
5. IR Sensitivity: Onboard motorized IR cut filter, support both day and night vision
6. Interface: 4-lane MIPI CSI-2
7. Default Lens Mount: CS-Mount
8. Frame Rate: Due to Jetson Xavier NX/Nano hardware only supports [email protected] h.264/h.265 encoding, you cannot use it for [email protected]

• Lens

1. Format: 1/2.3 inch
2. Focal Length: 6mm
3. Aperture (F): Max. F1.2
4. Field of View (FOV): 65° (H)
5. Mount: CS-Mount
6. Back Focal Length: 7.53mm
7. MOD: 0.2m Dimension: Φ30×31mm
8. Weight: 53g

• Camera board

1. Board Size: 38mm×38mm
2. Hole Pitch: Compatible with 29mm, 30mm, 34mm

Package Includes:

1. 1 x pcs 12.3MP IMX477 IR-CUT camera module
2. 1 x pcs 6mm focal length CS-mount camera lens
3. 1 x pcs 300mm/12inch 15pin to 22pin camera cable for pi A&B series