Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

(17 customer reviews)
Availability:

In stock


SKU: 7146
  1. Operating Voltage (logic level): 5V
  2. With USB cable and Soldered Connector
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. There is a bootloader installed in it
  8. Standard 0.1” spacing DIP (breadboard friendly).
  9. Manual reset switch.

 273.60

(Including GST)

In stock

Purchase this product now and earn 3 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Category: Boards Compatible with Arduino
Tags: Arduino, Arduino Nano, Nano, Microcontroller, CH340, Arduino Nano R3, ATmega328

The Nano Board R3 CH340 chip With USB Mini Cable chipboard is based on famous Arduino platform and does all the functions of Uno, but with a smaller footprint.

Nano Board R3 CH340 chip USB Mini Cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.

The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Nano.

The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Nano R3). It has more or less the same functionality of the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

The Nano Arduino can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.

Note:- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
If you are getting the error while uploading the code in the Arduino Nano or not detecting the port need to upload the bootloader

Features :

  1. 1 pair of TTL level serial transceiver ports RX / TX
  2. Using Atmel Atmega328P-AU MCU
  3. There is a bootloader installed in it
  4. Support USB download and Power
  5. Support for external 5V ~ 12V DC power supply
  6. Support power supply by 9V battery
  7. Support ISP download
  8. Automatic reset during program download.
  9. Power OK blue LED on the bottom.
  10. Green (TX), red (RX) and orange (L) LED.
  11. +5V to AREF jumper.
  12. Auto sensing/switching power input.
  13. Small mini-B USB for programming and serial monitor.
  14. ICSP header for direct program download.
  15. Standard 0.1” spacing DIP (breadboard friendly).
  16. Manual reset switch.

Package Includes :

1 x Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

Model Type

Nano

Color:

Blue

Microcontroller

ATmega328

Operating Voltage (VDC)

5

Input Voltage(Recommended)

7 to 12 V

Power Consumption (Watt)

1

Analog I/O Pins

8

Digital I/O Pins

22

PWM Output Pins

6

Architecture

AVR

Clock Speed

16 MHz

DC Current per I/O Pin (mA)

40

Flash Memory

32 KB

EEPROM

1KB

SRAM

2

Dimensions in mm (LxWxH)

45x18x5

Weight (g):

8

Shipping Weight 0.1 kg
Shipping Dimensions 6 × 5 × 3 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 17 reviews

4.8 overall
15
1
0
1
0

Add a review

  1. Happie Singh (verified owner)

    Good Product You Can Program It Using Phone No Issues Till Now

    Happie Singh

  2. rdhanas (verified owner)

    excellent working

    rdhanas

  3. shubhamdongare7758 (verified owner)

    Best arduno nano board

    shubhamdongare7758

  4. Swastik (verified owner)

    Arrived well packed in promised time. Set to work immediately. Should contain the cable. Cheapest in ROBU. recommend it.

    Swastik

  5. Swastik (verified owner)

    Very good well working board. Cheapest in ROBU. Go for it if needed. I wanted another but out of stock. Waiting…

    Swastik

  6. Parimit Kushwaha (verified owner)

    Nicely packaged and delivery on time works perfectly…nice to have compact size is good for controlling ws218b argb led

    Parimit Kushwaha

  7. SHRIJAL DAVE (verified owner)

    Good nano board where small size is required.

    SHRIJAL DAVE

  8. vishnupankajsnp (verified owner)

    Excellent….

    vishnupankajsnp

  9. krupamaypanda (verified owner)

    I had bought an arduino nano and a bluetooth board. The thingvI was unsatisfied cause the size of nano board was minute for the expectations, however, it was a good deal. Delivery had been done as I mentioned. The product is wonderful.

    krupamaypanda

  10. Hritik Samanta (verified owner)

    If the board is not getting recognized by your PC use an external power source at “VIN” pin.
    It’s a great nano board…?

    Hritik Samanta

  11. vizhigreen (verified owner)

    Tested Ok. Thanks for your service

    vizhigreen

  12. dnbakshi07 (verified owner)

    Good product in perfect working order

    dnbakshi07

  13. Venkat (verified owner)

    Working great!

    Venkat

  14. zubin priyansh (verified owner)

    Working great, no issues in connecting COM port. A very reasonable price. Tested both in linux and windows.

    zubin priyansh

  15. Nuhoney (verified owner)

    Nano board is not working well.

    Nuhoney

  16. pankajgharai (verified owner)

    Working Perfectly, good packing

    pankajgharai

  17. SUJEET KUMAR YADAV

    Nice quality & affordable price.

    SUJEET KUMAR YADAV

Aduino Nano 3.0 Code

Manual for New Windows

Manual for Old Windows

Manual for MAC

Manual for LINUX

Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

Orange Beginner/Starter Kit For Arduino Beginners

Hi, thanks for visiting this blog. In this blog, we will talk about some amazing things about Orange Arduino beginner Kit. There are many things to know about Arduino. Using...

Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

Orange Arduino Intermediate Kit

You know the basics of Arduino but don't know how to proceed or are you intimidated by the things that are on your roadmap to learning Arduino? If yes, then...

Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

Orange Arduino Beginner Kit

In this blog, you will learn everything about Orange Arduino Beginner Kit which is exclusively available on our website.

Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

Orange Arduino Advance Kit

Do you want to learn advanced things about Arduino? And Arduino is looking for resourceful material on advanced topics. If yes, then this is the end of your search. In...

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…