Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)

(23 customer reviews)

In stock

SKU: 16906
  1. Operating Voltage (logic level): 5V
  2. With Soldered Connector
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. There is a bootloader installed in it
  8. Standard 0.1” spacing DIP (breadboard friendly).
  9. Manual reset switch.


(inc GST)

₹ 355.08 (+18% GST extra)

In stock

Select below products to add together

Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm ₹ 39
NANO IO Shield Expansion Board For Arduino Screw Terminals ₹ 249

New Price: ₹ 419

Purchase this product now and earn 5 Robu Points!
Category: Boards Compatible with Arduino
Tags: Arduino, Arduino Nano, Nano, Microcontroller, CH340, Arduino Nano R3, ATmega328

The CH340 Soldered Nano Board R3 Chip without USB Cable chipboard is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.

Nano CH340 Soldered Board R3 Chip without USB cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.

The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano.

The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano R3). It has more or less the same functionality of the Arduino Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

The Nano can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.

Note:- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.

Features :

  1. 1 pair of TTL level serial transceiver ports RX / TX
  2. Using Atmel Atmega328P-AU MCU
  3. There is a bootloader installed in it
  4. Support USB download and Power
  5. Support for external 5V ~ 12V DC power supply
  6. Support power supply by 9V battery
  7. Support ISP download
  8. Automatic reset during program download.
  9. Power OK blue LED on the bottom.
  10. Green (TX), red (RX) and orange (L) LED.
  11. +5V to AREF jumper.
  12. Auto sensing/switching power input.
  13. Small mini-B USB for programming and serial monitor (cable not included).
  14. ICSP header for direct program download.
  15. Standard 0.1” spacing DIP (breadboard friendly).
  16. Manual reset switch.

Package Includes :

1 x Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)

Analog I/O Pins




Clock Speed

16 MHz



DC Current per I/O Pin (mA)


Digital I/O Pins




Flash Memory

32 KB

Input Voltage(Recommended)

7-12 V



Operating Voltage (VDC)


Power Consumption (Watt)


PWM Output Pins




Weight (gm)


Shipment Weight

0.012 kg

Shipment Dimensions

6 × 5 × 3 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 23 reviews

4.7 overall

Add a review

  1. auroleoshmandal (verified owner)

    Works as expected…. Would recommend to buy the breakout board as the pins are kind of hard to push down on the breadboard without damaging it… Product works like a charm though


  2. joe (verified owner)

    works nicely, well packed, great value for money!!


  3. ansmandar (verified owner)

    Good Product and working perfectly.
    The only problem I found with the connector pins are not so clear and I had to clean each and every one of them and took me lot of time.
    It was having some resistance and causing voltage drop across the pins, because I think it was kept in store room for long time. After cleaning them it works fine.


  4. ajsalk1999 (verified owner)

    Set as UNO in Arduino IDE (settings as nano didn’t work). Working great. Arrived in a good package.


  5. Abhijit (verified owner)

    Works Great. Highly satisfied and the the product was delivered on time


  6. [email protected]

    Use settings for UNO(not nano) while uploading ino scripts from IDE. Good quality one..its a UNO squeezed in to a nano great..

    [email protected]

  7. Vineet Ranjan (verified owner)

    As expected, excellent quality. Neatly soldered.

    Vineet Ranjan

  8. Atul Kumar Singh (verified owner)

    good product

    Atul Kumar Singh

  9. esrpradeep (verified owner)

    thank you for Good product, but please mention that all the LED indicators are RED in colour.


  10. [email protected]

    very good product.

    [email protected]

  11. Swapnil Jadhav (verified owner)

    Thanks Bro Very Good product

    Swapnil Jadhav

  12. [email protected] (verified owner)

    good quality

    [email protected]

  13. SUJEET KUMAR YADAV (verified owner)

    Good quality & affordable price.


  14. Abdul Manaf A T (verified owner)

    Good quality product

    Abdul Manaf A T

  15. Jayesh-ACT Shah (verified owner)

    It is useful for development good product for robotic applicat.

    Jayesh-ACT Shah

  16. Swapnil Jadhav (verified owner)

    Very Good Quality

    Swapnil Jadhav

  17. Satish Rao (verified owner)

    I have been using this product everyday since 12th Oct and the usage is more than 4 hours a day. It is performing very well without any issues. Have interfaced it with IR Remote, LCD Display and DC Motor through L293 Motor driver. Everything works perfectly. The small footprint of this board comes in very handy to develop your own hardware applications.

    Satish Rao

  18. Vipin (verified owner)



  19. Mohit prashant (verified owner)


    Mohit prashant

  20. Datta Kamat (verified owner)


    Datta Kamat

  21. K (verified owner)



  22. shrineels10 (verified owner)

    The soldered board option is just so good. Saved a lot of time for me. Good product. The board i received first did not work, but their quick response ensured i got a replacement within a week!


  23. Abhijit Majee (verified owner)

    This product is as good as I expected. The important point here Is the want to make is that you can purchase this soldered Arduino by just 10-15 more bucks than the unsoldered one. This not only saves time and effort in soldering the quite small pins but it also gives us a ready-to-go product to be used in our projects. I have bought both and seen the diff myself.

    Abhijit Majee

Aduino Nano 3.0 Code

Manual for New Windows

Manual for Old Windows

Manual for MAC

Manual for LINUX

Questions and answers of the customers

  1. 0 votes

    you need to install CH340 driver in your system... Read more

Only registered users are eligible to enter questions

You may also like…