Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

(1 customer review)
Availability:

In stock


SKU: 4657
  1. Operating Voltage (logic level): 5V
  2. 8 analog inputs ports: A0 ~ A7
  3. 14 Digital input / output ports: TX, RX, D2 ~ D13
  4. 1 pair of TTL level serial transceiver ports RX / TX
  5. Using Atmel Atmega328P-AU MCU
  6. There is a bootloader installed in it
  7. Standard 0.1” spacing DIP (breadboard friendly).
  8. Manual reset switch.

 379.00

(inc GST)

₹ 321.19 (+18% GST extra)

In stock

Select below products to add together

ORANGE Basic Kit For Arduino Nano ₹ 799
ORANGE Intermediate Kit for Arduino Nano ₹ 2349
ORANGE Starter Kit For Arduino Nano ₹ 1449

New Price: ₹ 379


Purchase this product now and earn 4 Robu Points!
Brand: Generic
Category: Boards Compatible with Arduino
Tags: Arduino, Arduino Nano, Nano, Microcontroller, CH340, Arduino Nano R3, ATmega328

The Nano R3 W/O USB Cable chipboard is based on famous Arduino platform and does all the functions of Uno, but with a smaller footprint.

The Nano R3 W/O USB Cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.

The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Nano.

The Nano Arduino is a small, complete, and breadboard-friendly board based on the ATmega328 (Nano R3). It has more or less the same functionality of the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

The Nano Arduino can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.

Note:- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.

Features :

  1. 1 pair of TTL level serial transceiver ports RX / TX
  2. Using Atmel Atmega328P-AU MCU
  3. There is a bootloader installed in it
  4. Support USB download and Power
  5. Support for external 5V ~ 12V DC power supply
  6. Support power supply by 9V battery
  7. Support ISP download
  8. Automatic reset during program download.
  9. Power OK blue LED on the bottom.
  10. Green (TX), red (RX) and orange (L) LED.
  11. +5V to AREF jumper.
  12. Auto sensing/switching power input.
  13. Small mini-B USB for programming and serial monitor.
  14. ICSP header for direct program download.
  15. Standard 0.1” spacing DIP (breadboard friendly).
  16. Manual reset switch.

Package Includes :

1 x Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Model Type

Nano

Color

Blue

Microcontroller

ATmega328

Operating Voltage (VDC)

5

Input Voltage(Recommended)

7 to 12 V

Power Consumption (Watt)

1

Analog I/O Pins

8

Digital I/O Pins

22

PWM Output Pins

6

Architecture

AVR

Clock Speed

16 MHz

DC Current per I/O Pin (mA)

40

Flash Memory

32 KB

EEPROM

1KB

SRAM

2

Dimensions (mm) LxWxH

45x18x5

Weight (gm)

8

Shipment Weight

0.03 kg

Shipment Dimensions

6 × 5 × 3 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. SUJEET KUMAR YADAV

    I am using the soldered version & I will say that it’s quality is very nice.

    SUJEET KUMAR YADAV

Aduino Nano 3.0 Code

Manual for New Windows

Manual for Old Windows

Manual for MAC

Manual for LINUX

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Orange Beginner/Starter Kit For Arduino Beginners

Hi, thanks for visiting this blog. In this blog, we will talk about some amazing things about Orange Arduino beginner Kit. There are many things to know about Arduino. Using...

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Orange Arduino Intermediate Kit

You know the basics of Arduino but don't know how to proceed or are you intimidated by the things that are on your roadmap to learning Arduino? If yes, then...

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Orange Arduino Beginner Kit

In this blog, you will learn everything about Orange Arduino Beginner Kit which is exclusively available on our website.

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Orange Arduino Advance Kit

Do you want to learn advanced things about Arduino? And Arduino is looking for resourceful material on advanced topics. If yes, then this is the end of your search. In...

Questions and answers of the customers

  1. 0 votes
    A Please check the cable or uninstall the device dri... Read more
Only registered users are eligible to enter questions

You may also like…