ATmega 16A-U PDIP-40 Microcontroller

Availability:

In stock


SKU: 162198
  1. Advanced RISC architecture – On-chip 2-cycle multiplier
  2. High endurance, non-volatile memory segments
  3. JTAG (IEEE 1149.1 compliant) interface
  4. Peripheral features – Real-time counter with separate oscillator
  5. Power-on reset (POR) and programmable brown-out detection
  6. Internal Calibrated RC oscillator
  7. External and internal interrupt sources
  8. Six sleep modes – Idle, ADC noise reduction, power-save, power-down, standby and extended standby
  9. 32 Programmable I/O lines

 199.00

(inc GST)

₹ 168.64 (+18% GST extra)

In stock

Prices shown above are Inclusive of GST

Purchase this product now and earn 2 Robu Points!
Category: Microcontroller IC
The ATMEGA16A-U is a 16-bit low power high-performance CMOS Microcontroller is based on the Atmel AVR enhanced RISC architecture. The device features 16kB self-programming flash program memory, 1024B SRAM, 512-byte EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug. The device achieves 16 MIPS throughput at 16MHz at 2.7 to 5.5V operation.

By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, allowing you to optimize power consumption versus processing speed. The Atmel AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.


Features:

  1. Advanced RISC architecture – On-chip 2-cycle multiplier
  2. High endurance, non-volatile memory segments
  3. JTAG (IEEE 1149.1 compliant) interface
  4. Peripheral features – Real-time counter with separate oscillator
  5. Power-on reset (POR) and programmable brown-out detection
  6. Internal Calibrated RC oscillator
  7. External and internal interrupt sources
  8. Six sleep modes – Idle, ADC noise reduction, power-save, power-down, standby and extended standby
  9. 32 Programmable I/O lines
  10. Supplier’s original packaging: Tube
  11. Applications: Industrial, Computers & Computer Peripherals

Package Includes:

1 x ATmega 16A-U PDIP-40 Microcontroller

Package/Case

PDIP-40

Minimum Supply Voltage (V)

2.7

Maximum Supply Voltage (V)

5.5

No. of Timers/Counters

3 Timer

No. of I/Os

32

Product Type

8-bit Microcontrollers – MCU

Product Series

ATmega16A

Maximum Clock Frequency (MHz)

16

Data Bus Width

8 bit

Interface Type

2-Wire, SPI, USART

Mounting Type

Through Hole

Program Memory Size (kB)

16

Data RAM size and Type

1KB SRAM

Data ROM Size and Type

512-B EEPROM

Operating Temperature Range (°C)

-24 to 84

Dimensions (mm) LxWxH

52.58 x 13.97 x 4.83

Shipment Weight

0.02 kg

Shipment Dimensions

8 × 8 × 6 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ATmega 16A-U PDIP-40 Microcontroller”

There are no reviews yet.

ATmega 16A-PU Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions