ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board

(7 customer reviews)
Availability:

In stock


SKU: 43195
  1. Microcontroller CH340
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 54 (of which 15 provide PWM output)
  6. Analog Input Pins 16
  7. DC Current per I/O Pin 40 mA
  8. Dimensions : 111 x 54 x 12 (LxWxH) mm.

 1,899.00

(inc GST)

₹ 1609.32 (+18% GST extra)

In stock

Select below products to add together

Cable For Arduino UNO/MEGA (USB A to B)-50 cm ₹ 34

New Price: ₹ 1899


Purchase this product now and earn 19 Robu Points!
Brand: Generic
Category: Boards Compatible with Arduino
Tags: Mega

The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.

It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode.

The board has the following new features:

  • 1.0 pin-out: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In the future, shields will be compatible both with the board that uses the AVR, which operate with 5V and with the Arduino Due which operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.

The Mega Arduino R3 Android Accessory Development Kit (ADK) can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm centre-positive plug into the board’s power jack.

Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board.


Package Includes :

1 x Mega R3 Android Accessory Development Kit (ADK) board.

Model Type

Arduino MEGA 2560

Microcontroller Chip

ATmega2560

Operating Voltage (VDC)

5

Input Voltage(Recommended)

7V to 12V

Input Voltage (limit)

6V-20V

Analog I/O Pins

16

Digital I/O Pins

54 (of which 15 provide PWM output)

Clock Speed

12 MHz

Flash Memory

256 KB

SRAM

8

EEPROM

4 KB

DC Current for 3.3V Pin (mA)

50

DC Current per I/O Pin (mA)

40

Weight (gm)

34

Shipment Weight

0.037 kg

Shipment Dimensions

12 × 6 × 3 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 7 reviews

4.7 overall
5
2
0
0
0

Add a review

  1. Simon George (verified owner)

    No issues except that, had to install drivers drivers as per
    https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all

    Till then windows 10 was not detecting it.

    I am using it for Mobiflight. Lot of inputs, I plan to build a custom panel for Microsoft Flight Simulator 2020.

    Simon George

  2. bhavin192 (verified owner)

    Working great with RAMPS 1.4.

    bhavin192

  3. shreekantpatel29 (verified owner)

    love the quality 👌

    shreekantpatel29

  4. durva7717 (verified owner)

    Good product

    durva7717

  5. murtaza1972 (verified owner)

    Pins on the board are not aligned very well, had purchased a Ethernet shield along with this board and mounting the shield took bit of a while. Could have been better. Otherwise the product works good so far, haven’t tested it fully yet.

    murtaza1972

  6. Uday paranjape (verified owner)

    Very good quality
    Good packing
    Fast delivery

    Uday paranjape

  7. Ravindra V (verified owner)

    Excellent quality product, works perfectly, looking for building the 3printer controller.
    Moreover, delivery was lightning fast. From Pune to Bangalore in 1 day. Excellent customer service

    Ravindra V

User Manual

Arduino Schematics

Orange Beginner/Starter Kit For Arduino Beginners

Hi, thanks for visiting this blog. In this blog,...

Orange Arduino Intermediate Kit

You know the basics of Arduino but don't know...

Orange Arduino Beginner Kit

In this blog, you will learn everything about Orange...

Orange Arduino Advance Kit

Do you want to learn advanced things about Arduino?...

Questions and answers of the customers

  1. 0 votes
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…