BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver

(10 customer reviews)
Availability:

In stock


SKU: 45627
  1. Stabilization Axes: 2
  2. Supply Voltage: 8V to 18V (3s-4s LiPo)
  3. Maximum DC current to each motor 2.8A
  4. Supported sensors: MPU6050
  5. Overcurrent protection: Yes
  6. Overheat protection: Yes
  7. Undervoltage protection: Yes
  8. Reverse polarity protection: Yes
  9. Support 2-8 series gimbal motor
  10. Peak current 10A

 1,399.00

(Including GST)

In stock

Select below products to add together


New Price: ₹ 1399


Purchase this product now and earn 14 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Generic
Category: Drone Gimbal and Accessories
Tags: Multirotors, quadcopter, Gimbal, Gimbal Brushless Motor, 3 Axis, 2 Axis, Gimbal Controller

BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver is the original BaseCam SimpleBGC 8-bit controller board (formerly also called AlexMos). While this board has been superseded by the 32-bit version, this 8-bit version is still available in the marketplace and is actively used and supported.

It still produces outstanding results!!!

Without the extension board, this controller can be used for building high-quality 2-axis camera stabilizing systems. The controller can also be used for 3-axis control systems with the addition of the extension board.

In either case, from a functional perspective, the newer 32-bit board is 100% backward compatible with this board, and users of this board can freely upgrade systems from this board to the newer 32-bit board.

In addition, the management software is backward compatible, so it is possible (or preferred) to use a new version of the GUI (SimpleBGC’s management software) with this board- giving an improved experience with this board and also further making an upgrade to the 32-bit board as easy as possible.

Adjustment

The controller board is configured through our multi-platform software product (SimpleBGC GUI). You may run this on a PC, Mac, or Linux. A version is also available for Android.

Note that the board has firmware and the GUI software runs externally (on a PC, Mac, or Linux, etc) but the GUI keeps track of the firmware number and it requires that the GUI revision be at or newer than the board’s firmware. 

While there is a User Manual for the 8-bit version, since you may use the GUI for the 32-bit board with this board (the 8-bit) it may nonetheless be instructive to obtain the newer and more thorough User Manual for the newer 32-bit version. This is especially pertinent if you choose to use the newer version of the GUI with this board. Remember however you can only use firmware for the 8-bit board on the 8-bit board.

Note:

We recommend to don’t flashing/Updating the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.


Warm Notice:
Wrong use way may damage the control board. Please follow the  instructions:

1. Recommended power supply is 12V(3s battery).
2, Camera must be fixed in the head (without any loosening).
3. Adjust the Gopro camera to the left or right,so that the camera is at Horizontal level.
4. Before camera fixed in the gimbal , please do not push ” on ” button to have power.
5.The gimbal camera must be use belt tight, otherwise it will have problems. And if you do this many times, it will cause damage to the flight controller.


Features :

  1. Adopts MOS tube drive, with larger current
  2. Support 2-8 series gimbal motor
  3. Peak current 10A
  4. With IIC interface
  5. Onboard USB for PC communication to configure and upgrade

Package Includes :

1 x BGC v3.15 Two-axis brushless gimbal driver Module
1 x Gyro sensor. (with 30 cm cable)
1x Cable

Max. Current to each Motor

2.8 A

Short Time Current to each Motor

7.1 A

Output Current Regulation

8 or 32 kHz PWM

Interface Type

I2C

Supported Sensors

MPU6050

Overcurrent protection

Yes

Overheat Protection

Yes

Under Voltage Protection

Yes

Reverse Polarity Protection

Yes

Dimensions in mm (LxW)

52 x 52

Cable Length (cm)

30

Mounting Hole(mm)

M3

Shipping Weight 0.06 kg
Shipping Dimensions 10 × 7 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 10 reviews

4.1 overall
7
1
0
0
2

Add a review

  1. darghya810 (verified owner)

    Good gimbal

    darghya810

  2. Kenistan Moraes (verified owner)

    Got a faulty board. Robu.in replaced it with a Better one ..

    Kenistan Moraes

  3. Kenistan Moraes (verified owner)

    not sure wat to say. I have a very positive feedback for robu.in . however this product is not up to the mark.Got 2 axis brushless gimbal the board failed in a week’s time . I didn’t have time to claim for warranty at the process is a bit hectic hence had to buy a replacement board for the brushless gimbal. The board didn’t work right out of the box had to return it back to robu. Still awaiting a response from their technical team.5 stars for robu.in . zero stars for this product.

    Kenistan Moraes

  4. Souhardya Das (verified owner)

    don’t buy

    Souhardya Das

  5. Souhardya Das (verified owner)

    Firmware is not matched with GUI

    Souhardya Das

  6. sami (verified owner)

    working well very good product value for money

    sami

  7. Ram Soni (verified owner)

    Original product and received in excellent condition

    Ram Soni

  8. Maj Anirudh Rathore

    good and valrue for money

    Maj Anirudh Rathore

  9. Maj Anirudh Rathore

    good, strong alliminum structu and valrue for money,

    Maj Anirudh Rathore

  10. Maj Anirudh Rathore

    good, strong alliminum structure and valrue for money,

    Maj Anirudh Rathore

Questions and answers of the customers

  1. 0 votes
    Q please provide the proper GUI version.It shows GUI vs Board version mismatch answer now
    Asked by jeevakvirkar8600 on November 23, 2023 5:01 pm
    A

    Hello, for your query kindly mail us at https:/... Read more

  2. 4 votes
    Q please provide the proper GUI version.It shows GUI vs Board version mismatch
    Asked by Souhardya Das on September 9, 2020 1:46 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…