Categories
CJMCU-TEMT6000 An Ambient Light Sensor
CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor CJMCU-TEMT6000 An Ambient Light Sensor

CJMCU-TEMT6000 An Ambient Light Sensor

2 Review(s)
Availability: Out stock
SKU: 130228

QUICK OVERVIEW

  1. AEC-Q101 qualified
  2. High photosensitivity
  3. Near-Human Eye Spectral Response
  4. Scalable Output Voltage
  5. Adapted to human eye responsivity
  6. Lead (Pb)-free reflow soldering
  7. Compliant to RoHS Directive 2002/95/EC and in
    accordance to WEEE 2002/96/EC

 130.00

(inc GST)

₹ 110.17 (+18% GST extra)

Out of stock - Join the waitlist to be emailed when this product becomes available

This CJMCU-TEMT6000 An Ambient Light Sensor module uses a special ambient light detector(TMET6000) with a spectral response that closely emulates the human eye. It helps you to detect the light density and reflect the analog voltage signal back to the Arduino controller. You can set the threshold of a voltage level to trig another unit on the Arduino project.

CJMCU-TEMT6000  is an ambient light sensor is a silicon NPN epitaxial planar phototransistor in a miniature transparent 1206 package for surface mounting. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm. While this device is very sensitive to ambient light, but which inhibit infrared (IR) spectrum, which can provide similar “to the human eye, ” the visible spectrum greater responsiveness.


APPLICATIONS:

Ambient light sensor for control of display backlight dimming in LCD displays and keypad backlighting of mobile devices and in industrial on/off-lighting operation.

  1.  Automotive sensors
  2. Mobile phones
  3. Notebook computers
  4. PDA’s
  5. Cameras
  6. Dashboards

Sample Code: 

void setup()
{
Serial.begin(9600); // open serial port, set the baud rate to 9600 bps
}
void loop()
{
int val;
val=analogRead(0); //connect sensor to Analog 0
Serial.println(val); //print the value to serial
delay(100);
}


Pinout:
Cable  Color Description
Black GND
Red VCC
Other output

 


 Features:

  1. AEC-Q101 qualified
  2. High photosensitivity
  3. Near-Human Eye Spectral Response
  4. Scalable Output Voltage
  5. Adapted to human eye responsivity
  6. Lead (Pb)-free reflow soldering
  7. Compliant to RoHS Directive 2002/95/EC and in
    accordance to WEEE 2002/96/EC

Package Includes:

1 x CJMCU-TEMT6000 An Ambient Light Sensor

1 x 3*1 Burg Pin (Straight)

 

Power supply mode

3.3 ~ 5 V

Maximum Current

20 mA

Collector-emitter voltage

1.5 V

Wavelength

570 nm

Detection angle

60 º

Length (mm)

14

Width (mm)

8

Height (mm)

3

Weight (gm)

2

Shipment Weight

0.085 kg

Shipment Dimensions

5 x 3 x 2 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

2 reviews for CJMCU-TEMT6000 An Ambient Light Sensor

  1. Rated 5 out of 5

    sayandas8101@gmail.com

    g

  2. Rated 5 out of 5

    Shrivatsa Bhat (verified owner)

    it is good quality and well packed and the readings are very much accurate

Add a review

Your email address will not be published. Required fields are marked *

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions