Cytron FD04A 4-Channel Motor Driver

Availability:

In stock


SKU: 16010
  1. Industrial grade PCB.
  2. Vmotor: 7 V to 25 V DC.
  3. Each component is soldered properly and tested.
  4. Able to drive 4 DC motor at 2.5A (peak), 1.5A continuously.
  5. 2 LEDs as a direction indicator for each motor.
  6. 1 LED as a power indicator.
  7. A pluggable connector for more user-friendly design.
  8. Fully compatible with Cytron DIY project, Flexibot – Using Transwheel (PR19).

 3,444.00

(Including GST)

In stock

Purchase this product now and earn 35 Robu Points!

Very Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Cytron
Category: Cytron Motor Drivers
Tags: Motor Driver, DC motor driver, Cytron, DC Motor Speed Controller, FD04A, Four Channel Motor Driver

The Cytron FD04A 4-Channel Motor Driver is specially designed to drive four DC brush motors. It can be used to drive more than two motors which are needed on Omni to drive the mobile robot. It offers low cost and easy to use DC motor driver capable of driving up 4 DC brush motor, and the current can goes up to 3-Ampere.

With minimum interface the board is ready for driving motor with direction, start, stop and speed control. Flexibot Driver 4 Channels (FD04A) is specially designed to drive up to 4 DC brush motors.

Cytron FD04A 4-Channel Motor Driver offers low cost and easy to use DC motor driver capable of driving up 4 DC brush motors and the current can goes up to 3-Ampere. By interfacing with Arduino Duemilanove (Arduino-Due) – Obsolete, replace with Arduino UNO, the board is ready for driving up motors with direction, start, stop and speed control. Arduino Duemilanove is a microcontroller board based on the ATmega328.

It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. The pins mapping for ATmega328 is essential and by choosing an Arduino microcontroller, it allows users to process inputs and outputs going to and from the chip in a simpler way in terms to control the motors easily.

In addition, further interface with PS2 Controller Starter Kit (SKPS) will allow users to control the motors with the PS2 controller through Universal Asynchronous Receiver/Transmitter (UART) which will establish a serial communication between Arduino and SKPS.


Features :

  1. Industrial grade PCB.
  2. Vmotor: 7 V to 25 V DC.
  3. Each component is soldered properly and tested.
  4. Able to drive 4 DC motor at 2.5A (peak), 1.5A continuously.
  5. Bi-directional control for 4 DC motors.
  6. 2 LEDs as a direction indicator for each motor.
  7. 1 LED as a power indicator.
  8. A pluggable connector for more user-friendly design.
  9. Fully compatible with Cytron DIY project, Flexibot – Using Transwheel (PR19).
  10. Dimensions : 107 x 53 x 12 (LxWxH) mm.

Improvement in Rev2.0:

  1. Upgrade 80% of the component to SMD and uses SMD method to produce better reliability!
  2. Smaller size.
  3. Additional test/manual buttons for each channel for fast verification and manual control of the motor.
  4. Vmotor polarity protection.
  5. 5V is more needed for operation.
  6. Smaller toggle switch for ON and OFF.

Package Includes :

1 x  4 Channel Motor Driver- FD04A Module


Useful Links :

Sample Project and Source Code: Flexibot – Using Transwheel 

“Sample Source Code”

“Interfacing FD04A and SKPS with Arduino”

“Joystick Controlled Flexibot by Using SKXBee”

Continuous Current (A)

1.5

No. of Channels

4

Operating Modes

PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No

Battery Protection Mode

No

Over-Current Protection (A)

Yes

Thermal Protection

Yes

LED Indicator

Yes

Test/Manual Button

Yes

Cooling Fan

No

Polarity Protection

Yes

Others

Power Switch On board power switch

Dimensions in mm (LxWxH)

107 x 53 x 12

Weight (g):

50

Shipping Weight 0.04 kg
Shipping Dimensions 10 × 10 × 7 cm
3 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 3 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cytron FD04A 4-Channel Motor Driver”

There are no reviews yet.

User Manual

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: Malaysia

You may also like…