Cytron Dual channel 10A Motor Driver UNO Robot Controller

(1 customer review)
Availability:

In stock


SKU: 49866
  1. Onboard 1A (maximum) 5V voltage regulator.
  2. Onboard 500mA (maximum) 3.3V voltage regulator.
  3. 0-5V digital outputs with 3.3V compatible inputs.
  4. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver)
  5. 6 Analog Inputs (Can be digital I/O too).
  6. Maximum current up to 10A continuous and 30A Peak.
  7. ISP 6-pin Header.
  8. 32k Flash Memory.
  9. 16MHz Clock Speed.
  10. R3 Shield Compatible.

 3,089.00

(Including GST)

In stock

Purchase this product now and earn 31 Robu Points!

Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Cytron
Category: Cytron Motor Drivers
Tags: Motor Driver, DC motor driver, Cytron, Stepper Motor Driver, DC Motor Speed Controller, Dual Channel Motor Driver

This Cytron Dual channel 10A Motor Driver UNO Robot Controller is Arduino UNO compatible with the built-in dual-channel 10A motor driver.

The onboard Atmega328P is the same microcontroller on official Arduino UNO and it is loaded with latest optiboot and you can select Arduino/Genuino UNO in Arduino IDE to develop the program.

Cytron 2 channel 10A UNO Robot Controller also offers several enhancements such as support for both locked-antiphase and sign-magnitude PWM signal as well as using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay and reduce the time for wiring.

The board incorporates most of the components of the typical applications. With a minimum interface, the board is ready to Plug and Play. Simply add in power, do simple coding and this board is ready to drive brushed motor.


Features :

  1. Onboard 1A (maximum) 5V voltage regulator.
  2. Onboard 500mA (maximum) 3.3V voltage regulator.
  3. 0-5V digital outputs with 3.3V compatible inputs.
  4. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver)
  5. 6 Analog Inputs (Can be digital I/O too).
  6. Maximum current up to 10A continuous.
  7. ISP 6-pin Header.
  8. 32k Flash Memory.
  9. 16MHz Clock Speed.
  10. R3 Shield Compatible.
  11. TX, RX, Power, pin 13 LEDs are moved to edge.
  12. LED indicator for I/0 pin
  13. I/O extension
  14. 2x HC-SR04 connector
  15. Utilize USB Micro-B socket.
  16. On board push buttons for fast test and manual operation.
  17. No polarity protection
  18. Dimension: 100 x 76 x 13 (LxWxH) mm
  19. Weight: 52 gm.
  20. Support up to 30A  peak(10 seconds) and 10A(continuous) per channel.
  21. Bi-directional control for two brushed DC motor
  22. Current limiting at 30A.
  23. Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
  24. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
  25. Speed control PWM frequency up to 20KHz (Actual output frequency is the same as input frequency).
  26. Support both locked-antiphase and sign-magnitude PWM operation.
  27. Arduino sketch compatible.
  28. Able to drive brushed motor from 6V to 24V.
  29. Single power input for both motor and the onboard controller.
  30. SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader.

Package Includes :

1 x Cytron Dual channel 10A Motor Driver UNO Robot Controller.


Useful Links :

Tutorial for Controlling MD10C with Arduino

Getting Started with Fritzing

Continuous Current (A)

10

No. of Channels

2

Over-Current Protection (A)

Yes

Thermal Protection

Yes

LED Indicator

Yes

Cooling Fan

No

Arduino Sheild

No- can be used with Wire connection

Polarity Protection

NO

Dimensions in mm (LxWxH)

100 x 76 x 13

Weight (g):

52

Shipping Weight 0.057 kg
Shipping Dimensions 12 × 10 × 5 cm
3 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 3 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Prateek Verma (verified owner)

    Perfect for Intermediate Users but Not recommended for Advanced Users.

    Prateek Verma

User Manual

Sample Code

Questions and answers of the customers

  1. 0 votes
    Q Is there any similar yet less expensive board ? answer now
    Asked by Rahul Patil on July 28, 2020 3:54 pm
    Answered by the admin

    alternate driver -SKU: 198176 and SKU: 19930... Read more

Only registered users are eligible to enter questions
Country Of Origin: Malaysia