Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno

Availability:

In stock


SKU: 43298
  1. Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
  2. Separate 3.3V voltage regulator for ESP8266-12 WROOM-02 module, 500mA max output.
  3. Each and every board is preassembled and tested before it is being shipped out to you.
  4. 802.11 b/g/n.
  5. Support Wi-Fi Direct (P2P), soft-AP.
  6. Integrated TCP/IP protocol stack.

 1,299.00

(Including GST)

In stock

Purchase this product now and earn 13 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Cytron
Category: Cytron Motor Drivers
Tags: Arduino, Cytron, ESP8266, Wifi, WROOM, WROOM-02, Shield, Arduino UNO, Arduino Shied

Because of IoT (Internet of Thing), everything is connected to the Internet, a crucial element is WiFi that provides the wireless connection to the Internet. We have been carrying the ESP module and many have used it. However, it is not user-friendly enough for the beginner. The Cytron ESP8266 WiFi Shield is 3.3V powered and the pins are not properly broken out. Integrating it to PIC or Arduino will require some skill and electronics interface.

With Cytron ESP8266 WiFi Shield it will be plug and use for Arduino user. The Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno comes pre-assembled with ESP8266-12 WROOM-02 module which offers WiFi connection to your Arduino board or project.

No additional soldering or wiring needed, just stack the shield on to UNO; Mega2560 or any compatible Arduino main board, select the pins for Serial communication with mini jumpers and the hardware connection is completed. The focus in program development, and the good news; there are plenty of libraries that you can utilize, we will show you the steps

The WROOM-02 comes pre-flashed with an AT-command firmware, so it can be controlled by any UART/Serial; but it also breaks out and provides command access to all of the ESP8266’s I/O. The shield itself does not limit to AT command, we have breakout most of the IO and you can program the WROOM-02 module directly.

Whether you want to add AT commands of your own; or flash custom firmware on the ESP8266, this feature may come in very handy especially with it utilizing the UART pin selectors.

UART/Serial communication pins can be configured/selected via mini jumpers

  1. USB – Direct to Arduino USB to Serial pin for flashing ESP8266 directly.
  2. D0/D1 – Hardware Serial pin of Arduino UNO and CT-UNO.
  3. D2, D3, D8, D9, D10, D11, D12, D13 – Software serial pins.
Compatibility:
  1. UNO R3.
  2. Mega 2560.
  3. many other Arduino compatible mainboards.

Features :

  1. Arduino R3 Layout, compatible with:
    1. Arduino UNO R3.
    2. Arduino Leonardo.
    3. many other Arduino compatible main boards.
  2. Onboard 3.3V voltage regulator for WROOM-02 module, 500mA max current output.
  3. Each and every board is preassembled and tested before it is being shipped out to you.
  4. UART/Serial communication pins can be configured/selected via mini jumpers:
    1. USB – Direct to Arduino USB to Serial pin for flashing ESP8266 directly.
    2. D0/D1 – Hardware Serial pin of Arduino UNO and CT-UNO.
    3. D2, D3, D8, D9, D10, D11, D12, D13 – Software serial pins.
  5. 802.11 b/g/n.
  6. Support Wi-Fi Direct (P2P), soft-AP.
  7. Integrated TCP/IP protocol stack.
  8. Integrated TR switch, balun, LNA, power amplifier and matching network.
  9. Integrated PLLs, regulators, DCXO and power management units.
  10. Integrated low power 32-bit CPU could be used as an application processor.
  11. +19.5dBm output power in 802.11b mode.
  12. Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.

Package Includes :

1 x  Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno.
Voltage Regulator (V)

3.3 / 5

Max Current Output (mA)

500

Output Power (dBm)

+19.5

Graphics

ESP-WROOM-02

Length (mm):

69

Width (mm):

53

Height (mm):

10

Weight (g):

75

Shipping Weight 0.078 kg
Shipping Dimensions 8 × 5.5 × 1 cm
3 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 3 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno”

There are no reviews yet.

User Manual

Schematic

Arduino Library Examples

Questions and answers of the customers

  1. 0 votes
    Q is it compatible to arduino 328 p ? can i upload and run sketch remotely ? answer now
    Asked by zipperkipper86 on January 12, 2020 8:43 pm
    A

    It can be supported but data is not provided if... Read more

Only registered users are eligible to enter questions
Country Of Origin: Malaysia

You may also like…