-13%
,

Cytron SmartDriveDuo-60 MDDS60 60A (100A peak)

(1 customer review)
Availability:

In stock


SKU: 8014
  1. Input Voltage (Motor): 10 – 45VDC
  2. Maximum current up to 100A peak (1 second), 60A continuously, each channel.
  3. Two manual/test buttons for each channel.
  4. Two output indicator LEDs for each channel.
  5. Suitable for combat or sumo robot.
  6. Battery Low Voltage Monitoring Mode
  7. DC Brush motor Driver, not for brushless motor
  8. Dual Channels, it can drive two brush motor independently, or mixed.
  9. Version: Rev 1.10

 13,731.00  15,769.00

(Including GST)

  You save(12.9%): ₹ 2,038.00

In stock

Select below products to add together


New Price: ₹ 13731


Purchase this product now and earn 138 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Cytron
Category: Motor/Drivers & Accessories on Sale, Cytron Motor Drivers
Tags: Motor Driver, DC motor driver, Cytron, DC Motor Speed Controller, SmartDriveDuo, SmartDriveDuo-60, MDDS60

The Cytron SmartDriveDuo-60 MDDS60 60A supports dual channels, 60A continuous current for each channel. Building a combat/sumo robot become easy, choose motor+wheel, get high power battery, thick wire, connect it to MDDS60, choose an RC controller and you have a robot !! Do check the User’s Manual for details. Quick Start Guide is here.

With knowledge and feedback we gathered from MD10C, MDD10A, MD30C, MDS40A, MDDS10, and MDS160A, Cytron has thrilled to launch this smart motor driver and can’t wait to see what you can do with it.

SmartDriveDuo60 has smart features of MDDS10, with higher continuous current capability, 60Amp each channel. It even has the brushless fan attached to the top cover to cool it! MDDS60 is ready with the capability to accept RC (Radio Control) signal for mix mode drive, analog voltage from the potentiometer, PWM from the microcontroller (Arduino, PIC, or any other microcontroller), and even controlled via UART (serial) command.

The operation modes are configured by the DIP switch on MDDS60. The commonly used configurations are printed on the bottom cover. High current MOSFETs are switching at 16KHz for quiet operation. To cover the driver properly and to mount the fans for cooling, we have added top and bottom cover! Nice!

With the onboard temperature sensor, this smart driver is able to limit the output current stage by stage preventing itself from overheat and burnt! The peak current is 100A for 1 second and it will automatically limit the output current.

Not to forget, to make it RC receiver friendly, we have added 2×3 header pin; with just 2 RC extension cable, the wiring is done, and it takes 1 minutes!

With MDDS60, you can now series up 3 SLA battery to power your motor as it supports up to 45V DC input. And you only require one power input to operate the motor and driver. Don’t worry, 3-cell and 6-cell Lipo battery are within the operating voltage 🙂 Hey! It also comes with battery low voltage warning feature, what else do you need?

Note:

  1. Do use proper wire/cable for battery and motor connection. Think jumper wire/cable cannot support the high current application. We recommend using AWG8 Red and Black multicore wire.
  2. NO polarity protection, please double check the power input connection.
  3. Do use proper cable/wire for the battery and load, thin/normal cable/wire will melt and burn. 

New Update!!!!

MDDS60 is upgraded to Rev1.10. There is a component change in the upgraded version. However, it does not affect the performance or the interface. MDDS60 is shipped in upgraded version based on its availability.Cytron Smartdriveduo-60 Mdds60 60A (100A Peak) -- Robu


Useful link:

Motor control using Arduino tutorial.


Features:

  1. It is DC Brush motor Driver, not for brushless motor
  2. Single power operation just connects power to battery input.
  3. Dual Channels, it can drive two brush motor independently, or mixed.
  4. Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
  5. Support Signed magnitude and Locked Anti-phase in PWM mode.
  6. Top cover comes with two DC brushless fans to cool the driver.
  7. Two manual/test buttons for each channel.
  8. Two output indicator LEDs for each channel.
  9. Power, Error indicator, RUN status (Left and Right) LEDs
  10. On board reset button to restart the MCU after changing operation mode.
  11. Temperature feedback for current limit and prevent overheating of MOSFET.
  12. Support up to 60A continuous current at room temperature.
  13. Support up to 100A peak for 1 second. Current will be limited as temperature rises.
  14. Suitable for combat or sumo robot.
  15. 16KHz switching frequency for quiet operation.
  16. Onboard switching voltage regulator for higher power efficiency.
  17. Battery low voltage monitoring mode.
  18. We have tried this driver with single power window motor at 24V, full load without smoke coming out 🙂

Package Includes:

1 x Cytron SmartDriveDuo-60 MDDS60 60A Module and ​​​2561 ​​Servo ​​Extension​​ Cable

Battery Protection Mode

Yes

Operating Modes

PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: Yes Analog: Yes, RC Servo Signal: Yes

Continuous Current (A)

60

Cooling Fan

Yes

LED Indicator

Yes

No. of Channels

2

Operating Voltage (VDC)

10V to 45V

Peak Current (A)

100

Polarity Protection

NO

Dimensions in mm (LxWxH)

190 x 121 x 45

Over-Current Protection (A)

Yes

Thermal Protection

Yes

Weight (g):

400

Shipping Weight 0.45 kg
Shipping Dimensions 20 × 13 × 5 cm
3 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 3 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. sanjay upadhyay (verified owner)

    This is one of the best ever motor driver purchased and seen in the market. Little bulky thou. Very robust. Tested this with mega motor. This takes only wire of Arduino uno, imagine.Rest is free for use. Excellent heat sink and packaging also. !!!! Thx

    sanjay upadhyay

MDDS60 Quick Start Guide

User Manual

Fritzing File

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: Malaysia

You may also like…