Brushless Motor Controller DC 12-36V 500W PWM Driver Board

(3 customer reviews)
Availability:

In stock


SKU: 456135
  1. Drive plate type: JYQD_V6.3E2
  2. Voltage range: 12V-36V
  3. Peak current: 20A
  4. PWM speed control: PWM frequency 1-20KHZ
  5. Duty cycle: 0-100%
  6. Drive power: ≤ 500W (related working voltage)

 1,139.00

(Including GST)

In stock

Purchase this product now and earn 12 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Generic
Category: Brushed / Brushless DC motor Driver
Tags: BLDC motor Driver, Brushless Motor Driver, PWM Brushless Sensorless BLDC Motor Controller

This Brushless Motor Controller DC 12-36V 500W PWM Driver Board is used for the 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor no-load working current is too large, the speed is not stable, the efficiency is low, and can’t start up with a load) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect.

 

Generic Untitled 2

 


Specifications and Features :

  1. Protection: Overload protection, locked-rotor protection, over-current protection
  2. Analog voltage speed regulation: 0-5V
  3. Operating temperature: -40 ~ +85℃
  4. Drive power: ≤ 500W (related working voltage)
  5. Speed control function: voltage speed regulation or single-chip
  6. microcomputer control PWM speed regulation

Wiring Diagram:

 

Wiring Diagram

Pin Connection :
5V -Driver board internal output voltage
Signal – Motor speed pulse signal output port, 5V pulse signal.

Control port: 

Z/F– Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is a reverse direction.
VR -Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm, connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
GND—Used for Drive board internal control.

Power port : 

MA —-motor phase A
MB —- motor phase B
MC—- motor phase C
GND—-DC-
VCC—-DC +
3. Use shielded wires if the drivers’ board has more than 50 cm distance from the motor, otherwise, it may lead to abnormal driving, affecting the normal use.
4.Control port distance: 2.54mm,Power port distance: 3.96 mm
5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
Application notes:
  1. Confirm that the voltage and power parameters of the motor do not exceed the range of the driver board as specified.
  2. The JYQD-V6.3E2 driver board is a bare board without housing and a heatsink. If the power of the motor is below 60W, it does not need to add a heatsink, It only needs to ensure normal ventilation and wall insulation. If the power of the motor is more than 100W, it must add a heatsink.
  3. Please take note that the JYQD-V6.3E2 driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
  4. The 5V output port on the driver board prohibits connecting an external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
  5. The “Signal” terminal on the JYQD-V6.3E2 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.

Package Includes :

1 x Brushless Motor Controller DC 12-36V 500W PWM Driver Board

Voltage Range(V)

12 – 36

Current handling Capacity(A)

15

Power handling Capacity(W)

500

Length (mm):

63

Width (mm):

42.5

Height (mm):

17

Weight (g):

30

Shipping Weight 0.033 kg
Shipping Dimensions 10 × 6 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 3 reviews

4.7 overall
2
1
0
0
0

Add a review

  1. dhirendrakumar (verified owner)

    Purchased it to experiment with my discarded maruti 800 car alternator to make it run ad brush less motor. It worked very well. I screwed on a heatsink too. But very light duty and expensive.

    dhirendrakumar

  2. mohanpalika

    please order the above driver Board

    mohanpalika

  3. tdghyd (verified owner)

    it s good and working well upto 2 amps more than that better to put heat sink

    tdghyd

SCHEMETIC DIAGRAM

Brushless DC Motor Working Principle and Applications

Read on to know more what a Brushless DC...

Questions and answers of the customers

  1. 0 votes
    Q Can we connect it to the mach3 Bob ?
    Asked by vishnunath1402 on January 17, 2021 1:37 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…