DFRobot Fermion MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)


Out of stock

Approx Restocking Date: 22nd April, 2024
SKU: 1680985
  1. Compact size, measuring only 13*13*2.5mm
  2. Low power consumption, operating current <20mA
  3. High sensitivity and rapid response recovery
  4. Advanced MEMS technology
  5. Gas detected: Ammonia (NH3)
  6. Sensitivity: R0(in air)/Rs(in 50ppm NH3) ≥ 3
  7. Lifespan: ≥5 years (in air)


(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: DF Robot
Category: Gas and Dust Sensor

This is DFRobot Fermion MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm). Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure ammonia concentration, which is suitable for ammonia leakage in cold storage, aquaculture risk control, toilet odor monitoring and other application scenarios.

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, NO2), which can be combined as per specific requirements.

Connection Diagram:

Df Robot Sku1680985

  • Ammonia leakage in cold storage
  • Aquaculture risk control
  • Toilet odor monitoring


Note: This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART).


Precautions for use:

  • Kindly remove the protective film before usage.
  • To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
  • Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
  • Prevent contamination from alkalis, alkali metal salts, and halogens.
  • Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
  • Avoid contact with water, condensation, and freezing.
  • Minimize excessive vibration, impact, and dropping.
  • Please refrain from employing this module in systems that involve personal safety concerns.
  • For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.


For more info., click below.


  1. Easy to use.
  2. Compact size, measuring only 13*13*2.5mm
  3. Low power consumption, operating current <20mA
  4. High sensitivity and rapid response recovery
  5. Advanced MEMS technology
  6. Gas detected: Ammonia (NH3)
  7. Sensitivity: R0(in air)/Rs (in 50ppm NH3) ≥ 3
  8. Lifespan: ≥5 years (in air)
  9. Good quality product

Package Includes:

1 x DFRobot Fermion MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)

1 x 2.54mm pitch header pin

SKU: 1680985 Category:
Detecting Range


Detection Gas

Ammonia (NH3)

Operating Voltage (VDC)

3.3 – 5 V

Max. Operating Current (mA)


Output Signal

Analog Voltage

Operating Temperature (°C)


Operating humidity

15-90%RH (non-condensing)


≥5 years (in air)

Length (mm):


Width (mm):


Height (mm):


Weight (g):

1 (approx)

Shipping Weight 0.012 kg
Shipping Dimensions 6 × 6 × 3 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.

What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall

Be the first to review “DFRobot Fermion MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China