DFRobot Fermion MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)

Availability:

In stock


SKU: 1680986
  1. Compact size, measuring only 13*13*2.5mm
  2. Low power consumption
  3. High sensitivity and rapid response recovery
  4. Advanced MEMS technology
  5. Gas detected: CO
  6. Sensitivity: R0(in air) / Rs(in 150ppm CO) ≥ 3
  7. Lifespan: ≥5 years (in air)

 549.00

(Including GST)

In stock

Purchase this product now and earn 6 Robu Points!

Very Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Brand: DF Robot
Category: Gas and Dust Sensor

This is DFRobot Fermion MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm). Fermion: MEMS Carbon Monoxide CO Gas Detection Sensor employs state-of-the-art micro electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20 mA), minimal heat generation, a short preheating time, and swift response recovery. The sensor can measure carbon monoxide gas concentrations qualitatively and is suitable for carbon monoxide leak alarms and portable carbon monoxide detectors.

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, NO2), which can be combined as per specific requirements.

Applications:
  • Petrochemical carbon monoxide detection
  • Metallurgy carbon monoxide detection
  • Mining carbon monoxide detection
  • Environmental protection

 

Note: This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART).

 

Precautions for use:

  1. Kindly remove the protective film before usage.
  2. To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
  3. Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
  4. Prevent contamination from alkalis, alkali metal salts, and halogens.
  5. Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
  6. Avoid contact with water, condensation, and freezing.
  7. Minimize excessive vibration, impact, and dropping.
  8. Please refrain from employing this module in systems that involve personal safety concerns.
  9. For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

 

For more info., click below.


Features:

  1. Easy to use.
  2. Compact size, measuring only 13*13*2.5mm
  3. Low power consumption
  4. High sensitivity and rapid response recovery
  5. Advanced MEMS technology
  6. Gas detected: CO
  7. Sensitivity: R0(in air) / Rs(in 150ppm CO) ≥ 3
  8. Lifespan: ≥5 years (in air)
  9. Good quality product

Package Includes:

1 x DFRobot Fermion MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)

1 x 2.54mm pitch header pin

SKU: 1680986 Category:
Detecting Range

5-5000ppm

Operating Voltage (VDC)

3.3 – 5 V

Max. Operating Current (mA)

20

Output Signal

Analog Voltage

Operating Temperature (°C):

-10~50℃

Operating humidity

15-90%RH (non-condensing)

Lifespan

≥5 years

Length (mm):

13

Width (mm):

13

Height (mm):

2.5

Weight (g):

1 (approx)

Shipping Weight 0.012 kg
Shipping Dimensions 6 × 6 × 3 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DFRobot Fermion MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China