DFRobot Fermion MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)

Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 1680997
  1. Compact size, measuring only 13*13*2.5mm
  2. Low power consumption, operating current <20mA
  3. High sensitivity and rapid response recovery
  4. Advanced MEMS technology
  5. Gas detected: ethanol, formaldehyde, toluene, etc
  6. Sensitivity: R0(in air)/Rs(in 150ppm ethanol) ≥ 3
  7. Lifespan: ≥5 years (in air)

 449.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: DF Robot
Category: Gas and Dust Sensor

This is DFRobot Fermion MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm). Fermion: MEMS Volatile Organic Compounds VOC Gas Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure VOC gas concentration and is suitable for indoor air quality detection, fresh air system, air purifier and other application scenarios.

The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, NO2), which can be combined as per specific requirements.

 

Applications:
  • Environmental monitoring: identify the sources and levels of benzene in the ambient air
  • Indoor air quality: measure the concentration of formaldehyde in the indoor air
  • Industrial safety: detect any leaks or spills of tetrachloroethylene
  • Fire detection: detect the early signs of fire and smoke by sensing the changes in the composition and concentration of VOCs in the air.
  • Health applications: measure the amount of acetone in the breath and provide feedback or guidance for diabetes management.

 

Note: This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART).

 

Precautions for use:

  • Kindly remove the protective film before usage.
  • To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
  • Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
  • Prevent contamination from alkalis, alkali metal salts, and halogens.
  • Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
  • Avoid contact with water, condensation, and freezing.
  • Minimize excessive vibration, impact, and dropping.
  • Please refrain from employing this module in systems that involve personal safety concerns.
  • For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

 

For more info., click below.


Features:

  1. Easy to use.
  2. Compact size, measuring only 13*13*2.5mm
  3. Low power consumption, operating current <20mA
  4. High sensitivity and rapid response recovery
  5. Advanced MEMS technology
  6. Gas detected: ethanol, formaldehyde, toluene, etc
  7. Sensitivity: R0(in air)/Rs(in 150ppm ethanol) ≥ 3
  8. Lifespan: ≥5 years (in air)
  9. Good quality product

Package Includes:

1 x DFRobot Fermion MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)

1 x 2.54mm pitch header pin

SKU: 1680997 Category:
Detecting Range

1-500ppm

Detection Gas

ethanol, formaldehyde, toluene

Operating Voltage (VDC)

3.3 – 5 V

Max. Operating Current (mA)

20

Output Signal

Analog Voltage

Operating Temperature (°C)

-10~50℃

Operating humidity

15-90%RH (non-condensing)

Lifespan

≥5 years (in air)

Length (mm):

13

Width (mm):

13

Height (mm):

2.5

Weight (g):

1 (approx)

Shipping Weight 0.012 kg
Shipping Dimensions 6 × 6 × 3 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DFRobot Fermion MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)”

There are no reviews yet.

Questions and answers of the customers

  1. 0 votes
    Q Is this factory calibrated or manual calibration is required ? answer now
    Asked by tddsale on November 21, 2023 2:07 pm
    A

    It is not calibrated you have to calibrate it b... Read more

Only registered users are eligible to enter questions
Country Of Origin: China