Categories
Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board
Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board

Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board

Availability: In stock
SKU: 221002

QUICK OVERVIEW

  1. Onboard STM8S103 high-performance microprocessor
  2. With digital tube display
  3. Valid Measurement Distance: 3-400cm
  4. Display Unit: cm
  5. Maximum Input Voltage: 5VDC
  6. 2.54mm White Socket: 5V power interface.

 449.00

(inc GST)

₹ 380.51 (+18% GST extra)

In stock

Purchase this product now and earn 5 Robu Points!
Brand: Generic

Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board adopts 8 bit MCU as the main control chip; it can be applied in distance measurement, testing HC-SR04 ultrasonic module performance. And it supports serial port display and digital tube display.


Features :

  1. Onboard STM8S103 high-performance microprocessor.
  2. With digital tube display.
  3. Serial port data output.
  4. Valid Measurement Distance: 3-400cm.
  5. Display Unit: cm.
  6. Max Error: 5V.
  7. Board Size: 36 x 25 x 12 mm.
  8. VCC, GND: 5V power interface.
  9. 2.54mm White Socket: 5V power interface.
  10. TX: module serial port transmits pin.
  11. RX: module serial port receive pin.
  12. NRST, SWIN: preset STM8 program download port.

Using Introduction:

1. The measurement distance can be displayed via a digital tube and serial port.
Digital Tube Display: directly plug in the ultrasonic module, connect 5V power.
2. Serial Port: plug-in ultrasonic module, VCC, TX, RX, GND respectively connects 5V, RX, TX, GND of USB to TTL module; serial port communication baud rate 9600, output format “D:XXX\r\n”; XXX represents distance, unit is cm.

Notice:

1. When measuring the distance, the area of a measured object should be no less than 0.5 square meters, and it should be smooth and has strong reflectivity; otherwise, it will affect the test result.
2. Valid Measurement Distance: 3-400cm; if longer than this range, it will lead to incorrect data or 000 display.

This Package does not include the HC-SR04 ultrasonic sensor; to buy this sensor Click here


Package Includes: 

1 x Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board.

Model

STM8S103

Input Voltage (volt)

5

Unit of Display value

cm

Valid Measurement Distance (cm)

3 – 400

Shipment Weight

0.083 kg

Shipment Dimensions

8 x 7 x 4 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Reviews

There are no reviews yet.

Be the first to review “Digital Display for HC-SR04 Ultrasonic Distance Measurement Control Board”

Your email address will not be published. Required fields are marked *