Categories
View cart “SP Racing F3 Flight Controller Integrate OSD Deluxe Version” has been added to your cart.
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS DJI NAZA-M V2 Multirotor Autopilot Controller set with GPS DJI NAZA-M V2 Multirotor Autopilot Controller set with GPS DJI NAZA-M V2 Multirotor Autopilot Controller set with GPS DJI NAZA-M V2 Multirotor Autopilot Controller set with GPS video video

DJI NAZA-M V2 Multirotor Autopilot Controller set with GPS

2 Review(s)
Availability: Out stock
SKU: 45468

QUICK OVERVIEW

  1. All-In-One Compact Multi-Rotor Autopilot System
  2. New Assistant Software for Smartphones
  3. Multiple Flight Control Modes and Intelligent Switching
  4. GPS Module Available for Accurate Position Stabilization
  5. 2-Axis Gimbal Stabilization
  6. Two Levels of Low Voltage Warnings and Protection
  7. Single Motor Failure Protection
  8. Supports Remote Gain Adjustment from the Transmitter
  9. Enhanced Failsafe Features, Including Auto Return-to-Home
  10. Supported ESC Output 400 Hz refresh frequency
  11. Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
  12. Power Consumption MAX: 1.5 W (0.3 A at 5 V)
  13. Operating Temperature: -10 to 50°C
  14. Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems

 14,999.00

(inc GST)

₹ 12711.02 (+18% GST extra)

Out of stock - Join the waitlist to be emailed when this product becomes available

Category:

DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.

The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe.

CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the iOSD Module, or a gimbal control unit (GCU).

What’s the difference of NAZA-M Lite/ NAZA-M V1/ NAZA-M V2

Product

Target Customer

Hardware

Software

Function Extension Ability

Major Components

NAZA-M Lite AP/RC entry level Based on NAZA V1 platform; no extension ability NAZA lite Independent assistant software and firmware; 1.GPS (Optional)
2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD)
MC
GPS(optional)
BEC/LED(Will have independent BEC and LED in the future)
NAZA-M V1 AP/RC hobbyist Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function; Share the same NAZAM V2 assistant software and firmware; 1.GPS (Optional)
2.Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station
MC
GPS(optional)
BEC/LED
NAZA-M V2+GPS Combo AP/RC hobbyist Optimized hardware structure;
Independent PMU module with amazing function extension ability;
Independent LED module;
Amazing function extension:such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station MC
GPS
NAZAPMU V2
LED

Features Description:

DJI NAZA V2 ALL-IN-ONE DESIGN

DJI adheres to continuously innovating and improving, with the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.

INDEPENDENT PMU WITH AMAZING FUNCTION EXTENSION

The DJI Naza M PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)

ADVANCED & IMPROVED ATTITUDE STABILIZATION ALGORITHM

The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products but also provides excellent maneuverability. It is more flexible and stable and gives the hobbyists a wonderful flight experience. New features have been included such GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.

DJI NAZA V2 – NINE TYPES OF MULTI-ROTORS SUPPORTED

DJI Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V;
( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please pay attention to the vibration situation and try to do some vibration dampening);

MULTIPLE FLIGHT CONTROL MODES/INTELLIGENT SWITCHING

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. A customer can switch among the three modes to adjust different flight environment. It also can adjust automatically in the flight environment and intelligent switch between GPS Atti. Mode and Atti. Mode to make sure the safety and security of flight. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.

NAZA V2 GPS MODULE AVAILABLE/ACCURATE POSITION HOLD

The plug and play GPS module will greatly enhance the performance for entry AP with Position Hold, Return-To-Home, and Intelligent Orientation Control function. With GPS Module, the multi-rotors will have position and altitude locked even in windy conditions. Hovering accuracy is about 2.5m horizontal and 0.8m vertical

INTELLIGENT ORIENTATION CONTROL

Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:

In course lock flying, the forward direction is the same as a recorded nose direction.


Features :

  1. All-In-One Compact Multi-Rotor Autopilot System
  2. New Assistant Software for Smartphones
  3. Supported Multi-rotors Quad-rotor: I4, X4
  4. Hex-rotor: I6, X6, IY6, Y6
  5. Octo-rotor I8, V8, X8
  6. Free Ground Station
  7. Take-Off Assistance
  8. Multiple Flight Control Modes and Intelligent Switching
  9. GPS Module Available for Accurate Position Stabilization
  10. Intelligent Orientation Control (IOC)
  11. Supports General, PPM, and S-Bus Receivers
  12. Arm/Disarm Modes for Safe Motor Starting
  13. 2-Axis Gimbal Stabilization
  14. Two Levels of Low Voltage Warnings and Protection
  15. Single Motor Failure Protection
  16. Supported ESC Output 400 Hz refresh frequency
  17. Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
  18. Supports Remote Gain Adjustment from the Transmitter
  19. Enhanced Failsafe Features, Including Auto Return-to-Home
  20. Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products
  21. Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems

System Requirements:
  1. Assistant Software Windows: 8, 7, XP SP3
  2. OS X: 10.6 or later
  3. Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
Flight Performance:
  1. Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
  2. Horizontal: ±8.2′ / ±2.5 m
  3. Max Angular Speed 200°/s
  4. Max Tilt Angle 35°
  5. Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
  6. Descent: 14.8 ft/s / 4.5 m/s

Package Includes :

1 x Main Controller Unit.

1 x Power Management unit.

8 x Servo cable.

1 x LED Module.

1 x Micro USB Cable.

2 x Adhesive Tape.

1 x GPS Module.

Model

DJI NAZA-M V2

Input Voltage (V)

MC: 4.8 to 5.5 V VU: 7.4 to 26.0 V (2S to 6S LiPo recommended)

Power Consumption

MAX: 1.5 W (0.3 A at 5 V) Normal: 0.6 W (0.12 A at 5V)

Operating Temperature Range

-10 to 50°C

Firmware

NAZAM V2

Weight (gm)

MC: 27 g PMU: 28 g GPS: 27 g

Dimensions (mm) LxWxH

MC: 45.5 x 32.5 x 18.5 mm PMU: 39.5 x 27.5 x 10 mm GPS & Compass: 46 (diameter) x 10 mm

Micro-SD Card Slot

No

Shipment Weight

0.225 kg

Shipment Dimensions

10 x 10 x 8 cm

3 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 3 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

2 reviews for DJI NAZA-M V2 Multirotor Autopilot Controller set with GPS

  1. Rated 5 out of 5

    Sunny (verified owner)

    always perfect

  2. Rated 5 out of 5

    ganeshthorat250 (verified owner)

    Best product

Add a review

Your email address will not be published. Required fields are marked *

User Manual