Dragino LoRaST IoT Module

Availability:

In stock


SKU: 945713
  1. 168 dB maximum link budget.
  2. +20 dBm – 100 mW constant RF output vs.
  3. +14 dBm high-efficiency PA.
  4. Programmable bit rate up to 300 kbps.
  5. High sensitivity: down to -148 dBm.
  6. Bullet-proof front end: IIP3 = -12.5 dBm.

 3,949.00

(inc GST)

₹ 3346.61 (+18% GST extra)

In stock

Purchase this product now and earn 40 Robu Points!
Category: LORA WiFi
Tags: LoRaST module, LoRa Antenna, Dragino LoRaST IoT Module

Dragino LoRaST IoT module featuring LoRa technology is a small wireless transceiver module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRa and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

LoRaST’s wireless part is based on SX1276/SX1278 which allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

Dragino LoRaST featuring LoRa technology is an open-source product, it is based on the STM32Cube HAL drivers, with customer application examples, user can program the IoT module via USART1, USART2, or STLINK. The factory firmware supports LoRaWAN 1.0.2 specification and the user can use AT Command to set up it and use it for their project directly.


Features:

  1. STM32L072CZT6 MCU
  2. SX1276/78 LoRa Wireless Modem
  3. Pre-load with ISP bootloader
  4. I2S,I2C,LPUSART1,SPI2,USB
  5. 22 x Digital I/Os
  6. 3 x 12bit ADC; 1 x 12bit DAC
  7. MCU wakes up by UART or Interrupt
  8. Baud rate configurable
  9. LoRaWAN 1.0.2 Specification
  10. Software base on STM32Cube HAL drivers
  11. External Antenna via I-Pex 4 connector

Package Includes:

1 x LoRaST module

1 x LoRa Antenna (unsolder)

Input Voltage (V)

1.9 to 3.6

MCU

STM32L072CZT6

Flash Memory

192

SRAM

20

EEPROM

6

Clock Speed

32 Mhz

STOP Mode

2.7μA @ 3.3v

Rx Mode

7.2mA

Tx Mode

[email protected] 20dbm

Length (mm)

42

Width (mm)

22

Height (mm)

3.6

Weight (gm)

4

Shipment Weight

0.04 kg

Shipment Dimensions

4 × 2 × 1 cm

15 Days Warranty Against Sealed Product

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defect.  Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Dragino LoRaST IoT Module”

There are no reviews yet.

Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China