eSun PLA Luminous-Rainbow

Availability:

In stock


SKU: 1079819
  1. High Rigidity
  2. Suitable for printing larger models due to low warp properties
  3. Consistent layers and clean retractions produce a superb surface finish.
  4. Compatible with dual extrusion
  5. Good adherence to clean glass bed (no additives necessary)
  6. Absorbs energy during the day in order glow at night

 2,499.00

(Including GST)

In stock

Select below products to add together

1 Vacuum Bag + 1 Suction Pump Set ₹ 129
eSun eBOX Lite 3D Printing Filament Storage Box for Keeping Filament Dry ₹ 5200

New Price: ₹ 2499


Purchase this product now and earn 25 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: eSun
Category: eSun PLA Luminous Filament

eSun PLA Luminous-Rainbow is a modification of standard PLA. Luminous Rainbow has the same easy printing characteristics as PLA and is added with a gorgeous glowing appearance when in the dark. PLA is a biological material refined from corn grains and is naturally degradable, when compared to ABS, PLA does not require a closed chamber, has low shrinkage, no warping, no cracking, and can print large models without irritating odours during printing.

The luminous brightness of this filament is directly related to the intensity and duration spent under a light source. After a good bit of time in direct sunlight or high-density light, your prints will glow with a green starry night effect, but we have another sneaky trick you can use if you’re planning a romantic surprise. The glow effect is intensified best after using an ultraviolet light source which you can use to charge them up, ready to shock your guests with awe!Esun Luminous Esun


PLA filament is our personal favourite

It can be printed very easily and without warping – making it perfect for getting started!

PLA FILAMENT ADVANTAGES AND TIPS

The eSun Luminous PLA Glow in the Dark Filament is ideal for beginners looking to venture into using more exotic filaments provided you also equip a stronger nozzle to your printer for these more abrasive filaments. eSun PLA is widely popular for its easy utility, clean smooth finishes, and capability for more stable prints. Good adhesion and forgiving temperature gauge result in a higher success rate to bring your glorious prints to life!

However, we don’t recommend leaving your beautiful new models near extreme heat sources. PLA filament is made of polymer materials, including plastics and, in eSun’s case, extracted corn grain which makes it eco-friendly. But extreme heat will cause it to warp and bend, unlike ABS Filament which has a higher melting temperature.

That said, eSun’s Luminous PLA Filament is compatible with most 3D printers and the Galaxy Black glow in the dark colour is the first of its kind to become available. Beginners and Experienced Makers alike can get excited to experiment and explore with it.

Please Note: Although this filament is based on PLA, the additive used to make it glow is quite abrasive, and as such we recommend getting a Spare Nozzle to use specifically for this filament. Alternatively, you could also choose to equip your 3D Printer with a more durable nozzle like a Hardened Steel Nozzle, a Plated Brass Nozzle or an A2 Tool Steel Nozzle, as well as the ultimate in durability, the Vanadium Nozzles, which will all be able to handle this filament with ease, while also offering slightly improved printing qualities for other filaments too.

Note:

1. Luminous PLA is easy to grind nozzle and extruder gear, it is recommended to use steel nozzle or ruby nozzle, hardened steel extruder gear will be perfect if the nozzle is clogging, replace the throat and nozzle.
2. The luminous effect is related to the intensity and time of light source. The longer the irradiation time, the better the luminous effect.

As the filament contains powders, you might want to reduce the chances of clogging by increasing the nozzle size to 0.6 and above. 0.4 has a chance of clogging. Abrasive filament is best equipped with hardened steel to prevent the hole from getting bigger.

If you are using an older nozzle, do cold-pulls. Or Just a lot of hot pulls. They really work! Step 1. Heat up to around 180C, Step 2. Jam down a filament, push it so that it starts to get soft/melt. Pull it up and see all the gunk it brings. Step 3. cut off the dirty 1-2Cm and repeat until clean. This almost fixes any clogs!

Recommended eSun Luminous Pla Filament  –  Suggested Print Settings:
  1. Best print temperature: 210-230 °C
  2. Print bed temperature: 45-60 °C
  3. Print speed: 40-100mm / s

Features:

  1. Printing Tips: Recommend Heat Bed 45-60°C, Recommend Extruder Temperature: 210-230℃; 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm). Compatible with 99.9% FDM 3D Printers.
  2. Glow in the Dark: PLA Luminous-Rainbow can glow in the dark after absorbing light energy, showing the appearance of colorful light, which is very romantic. Luminous brightness is related to the intensity and time of the light source, and the effect of ultraviolet light source is better than direct sunlight.
  3. Excellent Printability: Easy to print, no warping, good adhesion, no bubbles, extremely high success rate, smooth surface and high accuracy. The printed objects can be used as decoration kits Figure and used in creative field.
  4.  Free & No Plugging: Perfect roundness and very precise diameter tolerance, good winding, no overlapping or tangling. Feeds smoothly and constantly without clogging the nozzle or extruder.
  5. Vacuumed Packaging: Comes in a bag with a desiccant bag to keep it dry and keep out dust and foreign particles, nozzle jams and yield smooth 3D models.

Package Includes:

1 x eSun Luminous Pla PLA 1.75 mm 1 kg Filament for 3D printer – Premium Quality

Packaging:
  • 1kg eSun filament on a round spool
  • Vacuum sealed with desiccant to protect the filament from moisture!
SKU: 1079819 Category:
Color:

Rainbow

Material:

PLA Luminous

Filament Diameter (mm):

1.75

Weight (kg):

1

Density (g/cm3):

1.2

Tensile Strength (MPa):

72

Heat Distortion Temp. (°C)

53

Melt Flow Index

3.5 (190 degreeC/2.16kg)

Elongation at Break (%):

11.8

Flexural Strength (MPa)

90

Flexural Modulus (MPa)

1915

IZOD Impact (kJ/m2)

5.4

GTIN

6922572201569

Shipping Weight 1.415 kg
Shipping Dimensions 22 × 20 × 7 cm
1 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 1 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “eSun PLA Luminous-Rainbow”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China