FlexiForce A101 Force Sensor

Availability:

In stock


SKU: 125462

The A101 is our smallest sensor can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor

Applications:
  1. Testing and Measurement Equipment
  2. Embedded Electronics
  3. OEM Development Kit
  4. Consumer Electronics
  5. Multimeter

 949.00

(Including GST)

In stock

Purchase this product now and earn 10 Robu Points!

Very Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Tekscan
Category: Load / Pressure / Force / Flex Sensor
Tags: Tekscan FexiForce Sensor

The FlexiForce A101 Force Sensor is our smallest sensor optimized for high volume manufacturing and ideal for embedding into products. The 2-pin sensors are currently our smallest standard sensor.

The FlexiForce A101 sensors can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor

Applications:
  1. Testing and Measurement Equipment
  2. Embedded Electronics
  3. OEM Development Kit
  4. Consumer Electronics
  5. Multimeter

How to Adjust the Force Range:

In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1kΩ min.) To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.

Flexiforce A101 Force Sensor

Sensor resistance measured 20 seconds after applied load

The sensor was not attached to any drive circuitry


Typical Performance:

Linearity (Error): < ±3% of Full Scale (Line drawn from 0 to 50% load)

Repeatability: < ±2.5% (Conditioned Sensor, 80% of Full Force Applied)

Hysteresis: < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)

Drift: <5% / logarithmic time (Constant Load of 25 lb (111 N))

Response Time: < 5 µsec (Time required for the sensor to respond to an input force; Impact load – recorded on Oscilloscope)

Operating Temperature: -40°C – 60°C (-40°F – 140°F)*

* Force reading change per degree of temperature change = 0.36%/ºC (±0.2%/ºF)


Package Includes:

1 x FlexiForce A101 Force Sensor

Width (mm):

7.6

Thickness (mm):

0.203

Connector

2-pin Male Square Pin

Sensing Area (mm)

3.8

Pin Spacing (mm)

2.54

Surface Layer

Polyester

Operating Voltage (VDC)

0.25 ~ 1.25

Max Current (A)

0.2

Drift

< 5% per logarithmic time scale

Hysteresis

< 4.5 % of full scale

Linearity (Error)

< ±3% of full scale

Operating Temperature (°C):

-40 to 60

Repeatability

< ±2.5%

Response Time ( μS)

5

RoHS Compliant

Yes

Shipping Weight 0.004 kg
Shipping Dimensions 8 × 2 × 1 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “FlexiForce A101 Force Sensor”

There are no reviews yet.

Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: India