FlexiForce A502 Ultra Thin Force Sensor

Availability:

In stock


SKU: 125463
  1. Thickness 0.203 mm (0.008 in.)
  2. Length 81.3 mm (3.20 in.)
  3. Width 55.9 mm (2.20 in.)
  4. Sensing Area 50.8 mm x 50.8 mm (2 in. x 2 in.)
  5. Sensing Range: 0 to 22.6 Kg
  6. Connector 2-pin Male Square Pin
  7. Substrate Polyester
  8. Pin Spacing 2.54 mm (0.1 in.)
Applications:
  1. Testing and Measurement Equipment
  2. Embedded Electronics
  3. OEM Development Kit
  4. Consumer Electronics
  5. Multimeter

 2,849.00

(Including GST)

In stock

Purchase this product now and earn 29 Robu Points!

Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Tekscan
Category: Load / Pressure / Force / Flex Sensor
Tags: Tekscan FexiForce Sensor

A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).

The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor (see below in “How to Adjust the Force Range“).

Applications:
  1. Testing and Measurement Equipment
  2. Embedded Electronics
  3. OEM Development Kit
  4. Consumer Electronics
  5. Multimeter

Typical performance:

Force Versus Resistance Table


How to Adjust the Force Range:

* In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1kΩ min.) To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.

A502 Circuit Diagram


Typical Performance:

Linearity (Error): < ±3% of Full Scale (Line drawn from 0 to 50% load)

Repeatability: < ±2.5% (Conditioned Sensor, 80% of Full Force Applied)

Hysteresis: < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)

Drift: <5% / logarithmic time (Constant Load of 111 N (25 lb))

Response Time: < 5 µsec (Time required for the sensor to respond to an input force; Impact load – recorded on Oscilloscope)

Operating Temperature: -40°C – 60°C (-40°F – 140°F)*

* Force reading change per degree of temperature change = 0.36%/ºC (±0.2%/ºF)


Package Includes:

1 x FlexiForce A502 Ultra Thin Force Sensor

Thickness (mm):

0.203

Sensing Area (mm)

50.8

Surface Layer

Polyester

Connector

2-pin Male Square Pin

Drift

< 5% per logarithmic time scale

Hysteresis

< 4.5 % of full scale

Linearity (Error)

< ±3% of full scale

Max Current (A)

0.2

Operating Temperature (°C):

-40 to 60

Operating Voltage (VDC)

0.25 ~ 1.25

Pin Spacing (mm)

2.54

Repeatability

< ±2.5%

Response Time ( μS)

5

RoHS Compliant

Yes

Shipping Weight 0.008 kg
Shipping Dimensions 14 × 2 × 0.5 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “FlexiForce A502 Ultra Thin Force Sensor”

There are no reviews yet.

Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: United States

You may also like…