FTDI-FT232RNQ – USB 2.0 Slave to UART Converter-IC

Availability:

In stock


SKU: 1537196
  1. Data Rates: 3MBaud
  2. USB Speed: Full Speed (12Mbps)
  3. Interfaces: UART with 4 GPIO pins
  4. Channels: 1
  5. I/O Voltage: 1.8V to 5V

 504.00

(Including GST)

In stock

Purchase this product now and earn 6 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty Against Sealed Product
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: FTDI
Category: Interface ICs
Tags: UART Converter IC, FT232RNQ

The FT232RNQ is added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232RNQ is a USB-to-serial UART interface with optional clock generator output and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit-bang interface modes are available. USB to serial designs using the FT232RNQ has been further simplified by fully integrating the external EEPROM, clock circuit, and USB resistors onto the device.

The FT232RNQ adds two new functions compared with its predecessors, effectively making it a “3-in-1” chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle that can be used to protect customer application software from being copied.

The FT232RNQ is available in Pb-free (RoHS compliant) compact 28-Lead SSOP and QFN-32 packages.

Note:

  1. The product may vary in shape, color, and markings as compared to the image shown depending on availability.
  2. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Single chip USB to asynchronous serial data transfer interface.
  2. Entire USB protocol handled on the chip – No USB-specific firmware programming required.
  3. UART interface support for 7 or 8 data bits, 1 or 2 stop bits, and odd / even / mark/space / no parity.
  4. Fully assisted hardware or X-On / X-Off software handshaking.
  5. Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  6. In-built support for event characters and line break conditions.
  7. New USB FTDIChip-ID™ feature.
  8. New configurable CBUS I/O pins.
  9. Auto transmit buffer control for RS485 applications.
  10. Transmit and receive LED drive signals.

Package Includes:

1 x FT232RNQ – USB 2.0 Slave to UART Converter-IC

SKU: 1537196 Category: Tags: ,
Data Rates

3MBaud

USB Speed

Full Speed (12Mbps)

Interfaces

UART with 4 GPIO pins

Packages

32-pin QFN

Channels

1

I/O Voltage

1.8V to 5V

Operating Temperature

-40°C to +85°C

Shipping Weight 0.001 kg
Shipping Dimensions 9 × 7 × 1 cm
15 Days Warranty Against Sealed Product

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defect.  Replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “FTDI-FT232RNQ – USB 2.0 Slave to UART Converter-IC”

There are no reviews yet.

DATASHEET

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China