Categories
HALL SENSOR1
HALL SENSOR2 HALL SENSOR3

Hall Magnetic Sensor Module

2 Review(s)
Availability: In stock
SKU: 31314

QUICK OVERVIEW

  1. Working voltage:4.5V-24V
  2. Analog magnetic sensor module and a digital interface
  3. Built-in 13 LED build a simple circuit to produce a magnetic flash
  4. Black PCB board, made of the flame retardant epoxy resin material
  5. Small size and high sensitivity.
  6. Power consumption, 3 mA in rest, 8 mA when switched on.

 61.00

(inc GST)

₹ 51.69 (+18% GST extra)

In stock

Purchase this product now and earn 1 Robu Point!

The Hall Magnetic Sensor Module is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH (3.5 V). If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time the LED on the sensor lights up. An onboard LED will also indicate the presence of a magnetic field.

Precision and high reliability 3144 Series Hall principle of Hall effect switch IC, using technology to produce magnetic semiconductor integrated circuit, which is determined by the voltage regulator, Hall voltage generator, differential amplifier, Schmidt trigger, temperature compensation circuit and the collector electrode open circuit output stage consisting of magnetic sensing circuit, the input for the magnetic flux density, the output is a digital voltage signal.

This module is an analog magnetic field sensor. The strength of the field is given by an analog voltage at the signal pin of the module. The sensor must be connected to GND and 5V of the Arduino board. The output voltage is measured by analog pin A5 on the Arduino board.

The example program measures the output voltage of the sensor and presents the measured value in the serial monitor of the Arduino. The LED on the board flashes at a speed dependent on the strength of the magnetic field. This can be demonstrated with a small magnet.

This module has application in Non-contact switch Car ignition Brake circuit Position, speed detection and control Security alarm device Textile control system.

Pin Connection

Connect the Powerline (middle) and ground (-) to +5 and GND respectively. Connect signal (s) to pin 3 on the Arduino.


Features :

  1. Analog magnetic sensor module and a digital interface
  2. Built-in 13 LED build a simple circuit to produce a magnetic flash
  3. Black PCB board, made of the flame retardant epoxy resin material
  4. Small size and high sensitivity.
  5. Fast response temperature and good performance.

Package Includes :

1 x Hall Magnetic Sensor Module

Color

Black

Operating Voltage(VDC)

4.5 to 24

Power Consumption at Rest

3mA

Power Consumption when Switched

8mA

Operating Temperature (°C)

-40 to +90

Length (mm)

20

Width (mm)

16

Shipment Weight

0.085 kg

Shipment Dimensions

3 x 3 x 1 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

2 reviews for Hall Magnetic Sensor Module

  1. Rated 5 out of 5

    sayandas8101@gmail.com

    nice

  2. Rated 5 out of 5

    SAYAN PARAMANIK (verified owner)

    Very good product

Add a review

Your email address will not be published. Required fields are marked *

Example Code