Holybro Original Pixhawk PX4 Flight Controller (without GPS)

(4 customer reviews)
Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 311064
  1. Main FMU Processor: STM32F76
  2. 32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS,
  3. More computing power and 2X the RAM than previous versions)
  4. Abundant connectivity options for additional peripherals (UART, I2C, CAN)
  5. Redundant power supply inputs and automatic failover
  6. External safety button for easy motor activation
  7. New sensors with higher temperature stability
  8. Multicolor LED indicator
  9. Integrated vibrations isolation
  10. High-power, multi-tone piezo audio indicator
  11. microSD card for long-time high-rate logging

 33,399.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: Holybro
Category: Flight Controller & Accessories

Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and the PX4 team, optimized to run the full Dronecode stack and comes preinstalled with the latest PX4 firmware (v1.7).

The Pixhawk 4 features a new smaller form factor, more computing power, and 2X the RAM than previous versions. Additionally, it is equipped with new sensors with higher temperature stability, integrated vibrations isolation, increased ease-of-use: pre-installed with most recent PX4 (v1.7), and extra ports for better integration and expansion.

It contains the most advanced processor technology from ST Microelectronics, sensor technology from Bosch, InvenSense and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

The Pixwhawk 4’s microcontroller now has a 2 MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.

High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enable more accurate readings, allowing vehicles to reach better overall flight performances.

The two external SPI buses and six associated chip select lines allow adding additional sensors and SPI-interfaced payload. There are a total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS/Compass modules.

The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).

Note: As a Manufacturer is using the common box for all varients, you may receive the product box mentioned with GPS included, FYI this kit does not come with GPS module you have to buy it Separately.

Buy Holybro Pixhawk 4 GPS Module Click Here

 

Holybro Microsoftteams Image 55 1

 


Features:

  1. Main FMU Processor: STM32F76 (32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS, more computing power and 2X the RAM than previous versions)
  2. Abundant connectivity options for additional peripherals (UART, I2C, CAN)
  3. Redundant power supply inputs and automatic failover
  4. External safety button for easy motor activation
  5. New sensors with higher temperature stability
  6. Multicolor LED indicator
  7. Integrated vibrations isolation
  8. High-power, multi-tone piezo audio indicator
  9. microSD card for long-time high-rate logging
  10. 16 PWM outputs
  11. Increased ease-of-use: pre-installed with most recent PX4 (v1.8)

Interfaces 
  1. 8-16 PWM servo outputs (8 from IO, 8 from FMU)
  2. 3 dedicated PWM/Capture inputs on FMU
  3. Dedicated R/C input for CPPM
  4. Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
  5. Dedicated S.Bus servo output
  6. 5 general purpose serial ports,2 with full flow control,1 with separate 1.5A current limit
  7. 3 I2C ports
  8. 4 SPI buses<
    • 1 internal high-speed SPI sensor bus with 4 chip selects and 6 DRDYs
    • 1 internal low noise SPI bus dedicated for Barometer with 2 chip selects, no DRDYs
    • 1 internal SPI bus dedicated for FRAM
    • Supports dedicated SPI calibration EEPROM located on the sensor module
    • 1 external SPI buses
  9. Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control
  10. Analog inputs for voltage/current of 2 batteries
  11. 2 additional analog inputs
Electrical data, Voltage Ratings:
  1. Power module output: 4.9~5.5V
  2. Max input voltage: 6V
  3. Max current sensing: 120A
  4. USB Power Input: 4.75~5.25V
  5. Servo Rail Input: 0~36V
Environmental data, quality & reliability
  1. Operating temp. ~40~85C
  2. Storage temp. -40~85C
  3. CE
  4. FCC
  5. RoHS compliant (lead-free)

Package Includes: 

1 x Pixhawk4 (Plastic Case)

1 x Pixhawk4 PM07 Power Management Board

1 x I2C splitter Board

1 x Bunch of connecting cables

1 x USB cable

1 x Foam Set

1 x Pixhawk4 Quick Start Guide


Useful Links:

Pixhawk 4 Wiring Quick Start

Building PX4 Software

SKU: 311064 Category:
Main FMU Processor

STM32F765 (32 Bit Arm Cortex-M7, 216MHz)

Memory

2MB memory, 512KB RAM

IO Processor

STM32F100 (32 Bit Arm Cortex-M3, 24MHz, 8KB SRAM)

Onboard sensors

Accel/Gyro: ICM-20689
Accel/Gyro: BMI055
Magnetometer: IST8310
Barometer: MS5611

Dimensions (LxWxH) mm

44 x 84 x 12

Weight

15.8g (Board)

Shipping Weight 0.04 kg
Shipping Dimensions 10 × 8 × 4 cm
3 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 3 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 4 reviews

4.0 overall
2
0
2
0
0

Add a review

  1. ติดตั้งโซล่าเซลล์บ้าน

    %article_summaty%

    ติดตั้งโซล่าเซลล์บ้าน

  2. โซล่าเซลล์ราคาถูกคุณภาพดี

    %article_summaty%

    โซล่าเซลล์ราคาถูกคุณภาพดี

  3. พิโคเลเซอร์

    Nice blog here! Also your website loads up fast!

    พิโคเลเซอร์

  4. Nicolas

    %article_summaty%

    Nicolas

User Manual

Technical Datasheet

Pinout

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…