Categories
Orange 3806-OPTI-600-AB-OC Rotary Incremental Optical Encoders - ROBU.IN
Orange Rotary Incremental Optical Encoders-ROBU.IN Orange Rotary Incremental Optical Encoders ROBU.IN Orange Rotary Incremental Optical Encoders- ROBU.IN Orange Rotary Incremental Optical Encoders -ROBU.IN Orange Rotary Incremental Optical Encoders - ROBU.IN

Orange 600 PPR 2-Phase Incremental Optical Rotary Encoder

2 Review(s)
Availability: In stock
SKU: 22250

QUICK OVERVIEW

  1. Encoder Type: Optical
  2. IP52 (IEC Standard) Protection
  3. Stainless Steel Shaft
  4. High-quality 2-Meter Cable
  5. Anti-jamming Performance
  6. 2-Phase precise Output Readings
  7. Small size, Lightweight for Easy Installation

 1,590.00

(inc GST)

₹ 1347.46 (+18% GST extra)

In stock

Purchase this product now and earn 16 Robu Points!
Brand: Orange

A rotary encoder is a type of position sensor which is used for determining the angular position of a rotating shaft. It generates an electrical signal, either analog or digital, according to the rotational movement.

Orange 600 PPR Incremental Optical Rotary Encoder is hi-resolution optical encoder with quadrature outputs for increment counting. It will give 2400 transitions per rotation between outputs A and B. A quadrature decoder is required to convert the pulses to an up count. The Encoder is build to Industrial grade.

The Encoder comes with Standard 1.5 m cable length which can be extended with extra cable if needed.

Note:

  1. Consider Adding Pull up resistor to both A and B phase of the encoder output to avoid the effect of interference in output and get the precise logical output value from encoder
  2. Also adding pull up resistor to all phase output line protects the open collector output-triode from damage due to direct Vcc supply short circuit.
Power and Input Terminal Assignments:
Terminal Name Wire Color Description
Phase A White Quadrature encoded output A
Phase B Green Quadrature encoded output B
VCC Red VCC should be connected to +ve 5V of supply
GND Black Ground should be connected to negative of supply
Shield Golden Shield should be connected to GND

 

Shielding is important. At minimum, the cable should be protected either by a foil jacket with a drain wire or by a braided-wire shield that is grounded. For very sensitive applications or high-EMI environments, foil jacketed wires in combination with an overall braided-wire shield around the cable should be used to avoid the interference and precise encoder output.

Output:    NPN open collector


Features :

  1. High cost-efficient advantages.
  2. Incremental rotary encoder internal adopts ASIC devices
  3. High reliability, long life
  4. Anti-jamming performance
  5. Small size, lightweight, compact structure
  6. Easy installation
  7. Stainless steel shaft, High resolution, High quality, line interface with waterproof protection

Tutorial Code:

//these pins can not be changed 2/3 are special pins
int encoderPin1 = 2;
int encoderPin2 = 3;

volatile int lastEncoded = 0;
volatile long encoderValue = 0;

long lastencoderValue = 0;

int lastMSB = 0;
int lastLSB = 0;

void setup() {
  Serial.begin (9600);

  pinMode(encoderPin1, INPUT); 
  pinMode(encoderPin2, INPUT);

  digitalWrite(encoderPin1, HIGH); //turn pullup resistor on
  digitalWrite(encoderPin2, HIGH); //turn pullup resistor on

  //call updateEncoder() when any high/low changed seen
  //on interrupt 0 (pin 2), or interrupt 1 (pin 3) 
  attachInterrupt(0, updateEncoder, CHANGE); 
  attachInterrupt(1, updateEncoder, CHANGE);

}

void loop(){ 
  //Do stuff here

  Serial.println(encoderValue);
  delay(1000); //just here to slow down the output, and show it will work  even during a delay
}


void updateEncoder(){
  int MSB = digitalRead(encoderPin1); //MSB = most significant bit
  int LSB = digitalRead(encoderPin2); //LSB = least significant bit

  int encoded = (MSB << 1) |LSB; //converting the 2 pin value to single number
  int sum  = (lastEncoded << 2) | encoded; //adding it to the previous encoded value

  if(sum == 0b1101 || sum == 0b0100 || sum == 0b0010 || sum == 0b1011) encoderValue ++;
  if(sum == 0b1110 || sum == 0b0111 || sum == 0b0001 || sum == 0b1000) encoderValue --;

  lastEncoded = encoded; //store this value for next time
}

Package Includes :

1 x Orange 600 PPR 2-Phase Incremental Optical Rotary Encoder

4 x 4.7KΩ Resistors for pull-ups

1 x Mounting Screw Set

Model No.

3806-OPTI-600-AB-OC

Encoder Type

Incremental

Operating Voltage Range

5~24 VDC

Current Consumption (mA)

≤40 mA

Maximum Speed

5000 RPM

Pulse Per Revolution (PPR)

600

Counts Per Revolution (CPR)

2400

Operating Temperature Range

-24ºC ~ 84°C

Output Phase

AB

Protection

IP52 (IEC Standard)

Shaft Type

D-type
Solid

Shaft Length

12mm

Shaft Diameter

6mm

Mounting Hole(mm)

M3

Cable Length

1.5Meter

Weight (gm)

121

Body Dimensions

38.40 x 40 (Dia x Length)

Shipment Weight

0.235 kg

Shipment Dimensions

10 x 8 x 10 cm

6 Months Warranty

This item is covered with supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

2 reviews for Orange 600 PPR 2-Phase Incremental Optical Rotary Encoder

  1. Rated 4 out of 5

    Jagdish S. Shete (verified owner)

    GOOD PRODUCT

  2. Rated 5 out of 5

    PREM SAGAR

    good product & Delivered on time as expected…!

Add a review

Your email address will not be published. Required fields are marked *

User Manual

Dimensional Drawing