L293D Motor Driver/Servo Shield for Arduino

(10 customer reviews)
Availability:

Out of stock - Join the waitlist to be emailed when this product becomes available


SKU: 9736
  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  3. Can run motors on 4.5VDC to 25VDC.
  4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.

 165.00

(inc GST)

₹ 139.83 (+18% GST extra)

Out of stock - Join the waitlist to be emailed when this product becomes available

Brand: Generic
Category: Shield for Arduino
Tags: Arduino, Motor Driver, Arduino Shield, Arduino UNO, Arduino MEGA, Arduino DUE, Motor Driver Shield, L293, L293D

The L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.

This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.

The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to the PWM outputs of the Arduino.

Firmware
  1. Arduino Stepper/Servo software library with microstepping support.
    To install, click on Download in the top right corner, select zip and uncompress the folder.
    Rename the folder to AF-motor (check that the renamed folder contains the .cpp and .h files) and install it into the Arduino sketches/libraries folder. For information on how to use and install libraries, see our tutorial! This version now works with the Mega. Public domain!
  2. AccelStepper library with AFMotor support. This library allows for advanced stepper control including acceleration and deceleration, and concurrent stepper control!
    To install, click on Download in the top right corner, select zip and uncompress the folder.
    Rename the folder to AF-motor (check that the renamed folder contains the .cpp and .h files) and install it into the Arduino sketches/libraries folder.
Note:

Power for the motors can be supplied from the Arduino boards DC Jack (normally 9V) or from the 2-pin EXT-PWR terminal block. If you are supplying power from the EXT_PWR terminal block you should remove the PWR jumper or you could damage the shield and the Arduino board.

<<We have a variety of modules that can be interfaced with this L293D Motor Driver/Servo Shield. Some of them are listed below click on their name to know more>>

Arduino Boards
Servo Motors
DC Motors
28BYJ-48 Stepper Motor


Features :

  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
  3. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  4. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
  5. Pull-down resistors keep motors disabled during power-up
  6. Big terminal block connectors to easily hook up wires (18-26AWG) and power
  7. Arduino reset button brought up top
  8. 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  9. Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
  10. Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!

Package Includes :

1 x L293D Motor Driver/Servo Shield for Arduino


Tutorial :

Continuous Output Current

1.2A

Logic control voltage Vss

4.5~5.5V

Dimensions in mm (LxWxH)

70x54x18

Weight (gm)

35

Shipment Weight

0.037 kg

Shipment Dimensions

8 × 6 × 3 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 10 reviews

4.9 overall
9
1
0
0
0

Add a review

  1. Stephan

    My brother recommended I wouldd possibly like this blog.
    He wass once totally right. This put up actually made my day.

    Yoou cann’t consider simply how so much time I hhad spent for this information! Thank you!

    Workouts for bodybuilders web page pump muscles

    Stephan

  2. Pratham Maske

    good product

    Pratham Maske

  3. Vishnu Haran (verified owner)

    the product is good but the motor connection part is somewhat rusted.
    But works fine.

    Vishnu Haran

  4. NanduMaji (verified owner)

    Very good Quality product, working great……. Fast shipping…

    NanduMaji

  5. Akshay KG (verified owner)

    Good product, working perfectly in my project

    Akshay KG

  6. [email protected] (verified owner)

    very good product

    [email protected]

  7. [email protected] (verified owner)

    nice , fast transportation .

    [email protected]

  8. saurabh sinha (verified owner)

    very good product – Very fast delivery

    saurabh sinha

  9. Pratik (verified owner)

    Nice product and good quality

    Pratik

  10. Sholi (verified owner)

    Execellent quality

    Sholi

Datasheet

Schematic

Pin Diagram

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions

You may also like…