LCD1602 Parallel LCD Display with IIC/I2C interface

(12 customer reviews)

In stock

SKU: 26297
  1. Model: LCD1602
  2. Interface: I2C
  3. Interface Address: 0x27
  4. Character Color: White
  5. Backlight: Blue
  6. Supply voltage: 5V
  7. Board Dimensions( L x W x H ) mm: 80 x 36 x 18


(Including GST)

In stock

Select below products to add together

Male to Female Jumper Wires 40Pcs 20cm ₹ 39
MB102 830 Points Solderless Prototype PCB Breadboard High Quality ₹ 64
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino ₹ 322

New Price: ₹ 190

Purchase this product now and earn 2 Robu Points!

For refund/return/replacement, get support here
For bulk and B2B enquiries kindly mail us at [email protected]
Brand: Generic
Category: 16 x 2 LCD Display
Tags: LCD Display, I2C Interface, I2C, LCD1602, Display for Arduino Uno

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD1602 Parallel LCD Display with IIC/I2C interface is a quite good solution.

This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a blue background/backlight.

This is the great blue backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.

This display overcomes the drawback of LCD1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which show a good library and little coding.

The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.

If you already have the I2C adapter soldered onto the board like in this product, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. The Liquid Crystal Display works with 5 Volts. So we go for the 5V Pin.

The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

If you are having an I2C adapter and only want to buy a display then click below,

LCD1602 Parallel LCD Display

For more displays click below,

LED/LCD Display

Features :

  1. I2C Reduces the overall wirings.
  2. 16 characters wide, 2 rows
  3. I2C adapter allows flexibility in connections
  4. White text on the Blue background
  5. Single LED backlight included can be dimmed easily with a resistor or PWM.
  6. Arduino IIC/I2C interface was developed to reduce the IO port usage on the Arduino board

Package Includes :

1 x LCD1602 Parallel LCD Display with IIC/I2C interface

I2C Address


Character Color




Input Voltage (V)


Length (mm)


Width (mm)


Height (mm)


Weight (gm)


Shipping Weight 0.037 kg
Shipping Dimensions 8 × 5 × 3 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 12 reviews

5.0 overall

Add a review

  1. brotin.spam (verified owner)

    The LCD panel received was exactly as advertised. Worked flawlessly without any hiccups. The display is bright especially the side LED. The price is also very reasonable. Happy with the product.


  2. Anant Kirtane (verified owner)


    Anant Kirtane

  3. Aravind (verified owner)

    Working Great !


  4. pankaj.kumar.rspl (verified owner)

    Working ?


  5. vishnupankajsnp (verified owner)

    Perfect…. works as described


  6. mandayamkrishnakumarvaibhav (verified owner)

    Works well


  7. Prasanna Thapa

    Working like a charm…

    Prasanna Thapa

  8. cyberlaunch (verified owner)

    Value for money. Works as described.


  9. [email protected]

    perfect for arduino

    [email protected]

  10. Satish Rao (verified owner)

    I brought this on 10th Oct, 2018 and tested it on 16th Oct. Worked very easily without any hitches.Very clear and crisp display and the biggest advantage is the built-in i2c which saves pins. Connect to A4 and A5 of the arduino nano and use the sample program available on web and soon you are on your way.

    Satish Rao

  11. Milap (verified owner)

    easy to interface and affordable price


  12. Aakash (verified owner)

    Works Great, the main advantage of this over traditional 16*2LCD displays is that it requires only 4 pins compared to 16.


Example Sketch

I2C LCD Library

Questions and answers of the customers

  1. 0 votes
    Q Hi will this work with STM32NUCLEO board ? answer now
    Asked by pratik.dash on July 10, 2023 11:49 am

    Yes it will work!

  2. 1 vote
    Q How do I connect this display to a Raspberry Pi 4?
    Asked by prak_s on November 26, 2020 7:04 pm
    There are no answers for this question yet. Answer now
  3. 0 votes
    Q How to interface it with AT89S52 microcontroller ? answer now
    Asked by manishelectricalsdnh on June 29, 2020 9:58 pm

    For more information please visit this site: <... Read more

  4. 0 votes

    Please refer to the linked video. It will help ... Read more

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…