M5 X 4 mm Brass Heat set Threaded Round Insert Nut – 25 Pcs.

(1 customer review)

In stock

SKU: 467208

The Heat Set Threaded Round Insert Nut has been designed for post-mould installation into notch-sensitive thermoplastics using heat. It features very high pull-out and torque resistance.


(inc GST)

₹ 117.8 (+18% GST extra)

In stock

Purchase this product now and earn 2 Robu Points!

For bulk and B2B enquiries kindly mail us at [email protected]
Brand: EasyMech
Category: Nut Insert
Tags: Heat Set Threaded Round Insert Nut

The Brass Heat-Set Threaded Round Insert Nuts is used every day for assemblies and components that need to be joined together. When fasteners are used in traditional manufacturing, bolts are often tapped straight into the metal substrates. 3D printed parts are unique from a material and robustness standpoint, therefore threaded holes can wear easily if the fasteners are taken on and off multiple times. Heat-set threaded inserts are your method for success for these types of assemblies.

The Heat-Set Threaded Round Insert Nut has been designed for post-mold installation into notch-sensitive thermoplastics using heat. It features very high pull-out and torque resistance.

A heat-set threaded insert has two important features. The inside of the brass piece of hardware has a nice, threaded thru-hole. The exterior has knurls and ridges, so when installed using heat, the plastic can easily flow around and then solidify. Once solidified, the insert is in place, making it resist torque and pull-out.

Note: Product Image and color may vary slightly from the actual product.


Tools you need:
  1. Heat-set threaded Insert Nut

  2.  Plastic Body Part

  3. Soldering Iron

Preparing the threaded insert:

Use the soldering iron on a low setting to preheat the threaded insert using a shallow tapered soldering iron tip.


When the threaded insert is up to temperature (should only take a few seconds) apply the insert to the appropriate hold. Apply a very little amount of pressure and the insert will melt the plastic in the hole and allow the insert to be set in place. The plastic will flow around the knurls of the insert. Be sure to align the insert squarely and flush to the plastic surface. Remove the soldering iron when it is in place.



After a few moments, the threaded insert will be ‘set’ within the plastic. The threaded insert is ready to receive the screw’s threads and the parts can be assembled.


  1. Heat-Set is designed specifically for notch-sensitive plastics
  2. Expansion-Sets offer simple press-in installation
  3. Flow-Sert is a blind insert for installation during the moulding process
  4. Brass Material Can Resist Heat.
  5. Not Easy to Rust, Strong Corrosion Resistance.
  6. Very high pull-out and torque resistance.
  7. Can be installed by ultrasonic or Heat into thread tapered hole, or moulded in during injection.
  8. No need to counterbore or countersink the boss hole since the insert has guide pilot.
  9. Used on the injection moulding for tightly fixing.

Package Includes:

1 x M5 X 4 mm Brass Heat set Threaded Round Insert Nut – 25 Pcs
SKU: 467208 Category: Tag:


Thread Size


Thread Pitch (mm)


Internal Diameter(ID)(mm)


Outer Diameter (OD)(mm)


Length of Nut (mm)




Shipment Weight

0.05 kg

Shipment Dimensions

8 × 5 × 5 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

4.0 overall

Add a review

  1. shobitsharma01 (verified owner)

    works great, I have used them with my 3d printed designs. No complaints with quality of product.
    One thing to look for is that they have low pull out resistance due to vertical knurling.
    So any application where there is a high load on the bolt, threaded insert will be pulled out.
    For the application like lid for battery and other 3d printed containers, or applications with low load, these are perfect.
    I suggest you to see the video on “CNC Kitchen” youtube channel on 3d printed inserts.



Questions and answers of the customers

  1. 0 votes
    There are no answers for this question yet. Answer now
  2. 1 vote
    Q what is the hole size in plastic part for this insert
    Asked by upendra.vishwakarma33 on June 23, 2020 1:03 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: INDIA