Makerbase Mks Gen_L V2.1 Control Board
Makerbase-Mks Gen_L V2.1
Makerbase-Mks Gen_L V2.1
Makerbase Mks Gen_L V2.1 Control Board
Makerbase-Mks Gen_L V2.1
Makerbase-Mks Gen_L V2.1

MakerBase MKS Gen_L v2.1 Control Board

Availability:

Out of stock
Approx Restocking Date: 25 to 30 Days
SKU: 1632938
Add to Wishlist
  1. Model: MKS Gen_L v2.1
  2. Voltage supply: 12 – 24V
  3. Stepper drivers: Up to 5 x A4988, DVR8825, TMC2208, TMC2100, TMC2130 drivers (not included)
  4. Hot ends: Maximum 2
  5. Heated bed: Yes
  6. Controllable fans: Maximum 1
  7. Compatible display: LCD 2004, LCD 12864 or MKS touch screens
  8. Endstops: Min and Max for X, Y and Z axis

₹ 2,511.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: Makerbase
Category: 3D Printer Display and Controller

The MKS Gen-L V2.1 Controller Board is designed by Makerbase and is a combination of the Arduino Mega 2560 and the RAMPS 1.4 board in a smaller and more cost-effective package than the MKS Gen 1.4 controller board.  The V2.1 has also been updated to control the Trinamic TMC2208 and TMC2100 stepper drivers in UART mode and even the TMC2130 driver in SPI mode.  It has the same capability as the RAMPS board with the following advantages:  It can run from 12 – 24V for those high power applications, it consists of a single board with improved thermal control, it has an improved USB controller and the connector for the screen is already on the board.

Makerbase Mks Gen L V2 2

Makerbase Mks Gen

Features:

  1.  Integrate 2560 and Ramps1.4 to one PCB, easier wiring and more stable.
  2.  Use high-quality 4-layer PCB.
  3. Use Marlin firmware,same configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  4. Use special power chip, support 12V-24V.
  5. Support a variety of stepper drivers: 4988,8825,TMC2208 and TMC2100.
  6. Available to work with LCD2004, LCD12864, MKS TFT24/28/32/35/70.
  7. Accept 24V input, reduce the heated bed current to 1/4 that solves the Mosfet heat problem efficiently.
  8. Available to connect external large stepper drivers.
  9. 9Retain Servos, AUX-1 and AUX-2 interface of Ramps1.4, provide three 5V output and three 12V output interfaces.

Package Includes:

1 x MakerBase MKS Gen_L v2.1 Control Board

1 x USB cable

SKU: 1632938 Category:
Item Type:

Controller Board Only
Model Series:

MKS Series
Input Voltage (V)

12-24V
Hot ends (max)

2
HeatBed (Y/N)

Y
Controllable Fans

1
Compatible Display

LCD 12864 or MKS touch screens, LCD 2004
Length (mm):

110
Width (mm):

84
Height (mm):

20
Weight (g):

80
Shipping Weight 0.112 kg
Shipping Dimensions 17.5 × 13 × 3 cm
15 Days Warranty Against Sealed Product

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defect.  Replacement will be done against manufacturing defects.

What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MakerBase MKS Gen_L v2.1 Control Board”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

Related products