Mamba F4 pro V2 flight controller

(1 customer review)
Availability:

Out of stock - Join the waitlist to be emailed when this product becomes available

Approx Restocking Date: NA
SKU: 1176663
  1. Model: Mamba F4 pro V2
  2. Input voltage: 2 – 6s LiPo support
  3. Gyroscope: MPU6000 (reserved external gyroscope interface)
  4. Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
  5. Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
  6. Integrated with OSD, support BF Ground Station adjust OSD
  7. Adjust the PID by OSD by remote control

 2,892.00

(inc GST)

Out of stock - Join the waitlist to be emailed when this product becomes available

Brand: Generic
Category: Flight Controller & Accessories
Tags: F4, Mamba F4 pro V2, MAMBA

Stack Mamba F4 pro+V2 flight controller with your desired compatible ESC to build your F4 V2 pro flight controller. This F4 Pro + V2 has a Size of  36 x 36mm with Mounting Holes at the pitch of 30.5×30.5mm and its Net Weight is 13g. This Omnibus F4 Flight Controller equipped with Processor: STM32F405

 

 


 Features:

  1. Gyroscope: MPU6000 (reserved external gyroscope interface)
  2. Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
  3. Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
  4. Integrated with OSD, support BF Ground Station adjust OSD
  5. Adjust the PID by OSD by remote control
  6. Support Dshot Protocol
  7. Support SmartAudio, adjust the VTX by OSD (UART3)
  8. MicroSD card BlackBox

Specification:

  1. Input voltage: 2 – 6s LiPo support
  2. BEC Output: 5V 3A
  3. Baro (BMP280)
  4. 5.8G 40CH 25/200/600/800mW FPV Transmitter
  5. Frequency: 5362 – 5945MHz
  6. Video Format: NTSC / PAL
  7. Transmit power: 25 / 200 / 600 / 800mW switchable
  8. Working voltage: DC 7 – 24V
  9. Output voltage: 5V / 450mA
  10. Operating Current:
    1. 240mA @ 25mW
    2. 340mA @ 200mW
    3. 520mA @ 600mW
    4. 600mA @ 800mW
  11. Transmission Distance: 200m @ 25mW
    1. 2KM @ 200mW
    2. 4KM @ 600mW
    3. 6KM @ 800mW
  12. Remote Software protocol: SmartAudio V2.0
  13. Audio Bandwidth: 6.5MHz
  14. Video Bandwidth: 18MHz
  15. Channel: 40CH
  16. Range: up to 4km omnidirectional RHCP antenna
  17. Connector: MMCX
  18. Board Dimensions (L x W x H) mm: 30.5×30.5 x 9
  19. Weight (g): 15

Package Includes:

1 x Mamba F4 Pro+ V2 Flight Controller

1 x Connecting Wires

 

Based on 1 review

2.0 overall
0
0
0
1
0

Add a review

  1. triloksingh.ts97 (verified owner)

    good pcb but when vtx is on working it’s too hot good condition video tx in 500 mw but Rx setup is some different because Wich wire is show vcc gnd and signal wrong.actuly signal wire is just down the power led conector

    triloksingh.ts97

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China