MAX7219 Digital Tube Display Module Control Module

Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 408553

The MAX7219 has integrates a convenient four wire serial interface that can be used to all micro-controller, microprocessor. Each on-chip data can be addressed in the update without rewriting all display, and also allows you to select each data encoding or no-coding.

 106.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: Generic
Category: Seven Segment Display

The MAX7219 Digital Tube Display Module Control Module has integrates a convenient four-wire serial interface that can be used to all micro-controller, microprocessors. Each on-chip data can be addressed in the update without rewriting all display, and also allows you to select each data encoding or no-coding.

It is an integrated serial input/output common-cathode display drivers, which connects the microprocessor and 8-bit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD encoders, multi-channel scanning loop, segment word driver, but also an 8×8 static RAM that stores each data. Only one external register is used to set the current of each LED segment.

A convenient four-wire serial interface can connect all common microprocessors. Each data can be addressed in the update without rewriting all displays. MAX7219 also allows the user to select each data encoding or no coding.

The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data, there is an all-LED light detection mode.

Wiring instructions:
  1. VCC to 5V,
  2. GND to GND,
  3. DIN to P00,
  4. CLK to P02,
  5. CS to P01

Note: This Product is available in two different variant of IC (MAXIM MAX7219 and GC7219) we will ship it randomly.


Sketch Code:
/*

pin 12 is connected to the DataIn 
pin 11 is connected to the CLK 
pin 10 is connected to LOAD 

*/


#include "LedControl.h" 
LedControl lc=LedControl(12,11,10,1); 

void setup()
{
Serial1.begin(9600);
// Initialize the MAX7219 

Serial.write("14CORE TEST CODE FOR LED MAX7219 LED TUBE");
lc.shutdown(0,false); // To Enable the Display 
lc.setIntensity(0,15); // To set the brightness level (0 is min, 15 is max) 
lc.clearDisplay(0); // To Clear the display register 
//} 
}

void loop()
{

// test afisare un anumit text
lc.clearDisplay(0); // To Clear the display register 

lc.setDigit(0,7,2, false); // To display the 2 first column on the left (column 7) 
lc.setDigit(0,6,5, true); // To display a 5 column 6 and decimal point
lc.setDigit(0,5,4, false); // To display a 4 column 5
lc.setRow(0,4,B1001110);
lc.setDigit(0,2,3, false); // To show the 5 on 2nd 
lc.setDigit(0,1,7, false); // To Place a 0 in the column 1
lc.setRow(0,0,B0110111);

delay(3000);

// fac alt text
lc.clearDisplay(0); // Clear display register 
lc.setDigit(0,7,1, false); // To display a 1 at the first column on the left (column 7) 
lc.setDigit(0,6,2, false); // To display a 2 column 6 and decimal point
lc.setRow(0,5,B00000001);
lc.setDigit(0,4,4, false); // display a "4" in column 4
lc.setDigit(0,3,2, false); // display a "2" in column 3
lc.setRow(0,2,B00000001);
lc.setDigit(0,1,3, false); // To display a 3 column 1
lc.setDigit(0,0,6, false); // 6 show a first hand column, column 0

delay(3000);

// fac inca un text
lc.clearDisplay(0); // To Clear the display register 
lc.setRow(0,6,B01100010); // "n" 
lc.setRow(0,5,B00100000); // "i" 
lc.setRow(0,4,B01110011); // "q" 
lc.setRow(0,3,B00000001);  
lc.setRow(0,2,B01000010); // "r" 
lc.setRow(0,1,B01100011); // "o"  

delay(3000); // Delay 3 Seconds
}

Specifications and Features:

  1. 0.36-inch Common cathode
  2. Only need three IO ports can drive 8-bit digital tube
  3. The module compatible with 5V / 3.3V microcontroller (51 / AVR / STM3) and Raspberry Pi
  4. Only need three IO ports can drive 8-bit digital tube
  5. The module compatible with 5V / 3.3V microcontroller (51 / AVR / STM32…)
  6. PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen
  7. Board Dimensions (LxWxH)mm: 83 x 15 x 17
  8. Weight: 20g.

Package Includes:

1 x MAX7219 Digital Tube Display Module Control Module.

SKU: 408553 Category:
Operating Current (mA)

330

Operating Temperature range (°C)

-40 ~ +85

Serial Interface

10MHz

Length (mm):

83

Width (mm):

15

Height (mm):

17

Weight (g):

20

Shipping Weight 0.022 kg
Shipping Dimensions 10 × 5 × 3 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MAX7219 Digital Tube Display Module Control Module”

There are no reviews yet.

Datashet

LedControl.h Code Library | GetHub

Schematic

Questions and answers of the customers

  1. 0 votes
    Q LED size not seen. assume 0.39" answer now
    Asked by dipiti on January 30, 2021 9:49 pm
    A YES
  2. 0 votes
    Q is cascading possible i.e Dout pin available? answer now
    Asked by MK DEVELOPER on August 6, 2020 6:45 am
    A Yes, can be seen in attachments
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…