-25%
,

MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC

Availability:

In stock


SKU: 162123
  1. User-programmable digital filters for gyroscope, accelerometer, and temp sensor
  2. Digital-output temperature sensor
  3. 9-Axis MotionFusion by the on-chip digital motion processor (DMP)
  4. Auxiliary master I2C bus for reading data from external sensors
  5. Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
  6. MEMS structure hermetically sealed and bonded at the wafer level
  7. 10,000 g shock tolerant
  8. 400kHz fast mode I2C for communicating with all registers

 210.00  279.00

(Including GST)

  You save(24.7%): ₹ 69.00

In stock

Purchase this product now and earn 3 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Category: Sensor ICs, Electronics Components on Sale
The MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC incorporates InvenSense’s MotionFusion and run-time calibration firmware that enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices in motion-enabled products, and guarantees that sensor fusion algorithms and calibration procedures deliver optimal performance for consumers.
.The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts. The parts’ integrated 9-axis MotionFusion algorithms can even access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.

For precision tracking of both fast and slow motions, the MPU-6050 features a user-programmable gyro full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g.

NOTE: This product is available in two different dimensions. We’ll ship this according to it’s availability.


Features: 

  1. User-programmable digital filters for gyroscope, accelerometer, and temp sensor
  2. Digital-output temperature sensor
  3. Auxiliary master I2C bus for reading data from external sensors
  4. Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
  5. MEMS structure hermetically sealed and bonded at the wafer level
  6. 400kHz fast mode I2C for communicating with all registers
  7. Applications: Consumer Electronics, Sensing & Instrumentation, Automation & Process Control, System Monitoring, Robotics.
  8. Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
  9. Tri-Axis accelerometer with a programmable full-scale range of ±2g, ±4g, ±8g and ±16g
  10. Reduced settling effects and sensor drift by the elimination of board-level cross-axis alignment errors between accelerometers and gyroscopes
  11. 9-Axis Digital Motion Processing (DMP) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection
  12. Embedded algorithms for run-time bias and compass calibration. No user intervention required
  13. Digital-output temperature sensor
  14. Digital input on FSYNC pin to support video Electronic Image Stabilization and GPS
    Programmable interrupt supports gesture recognition, panning, zooming, scrolling, free fall interrupt, high-G interrupt, zero-motion detection, tap detection, and shake detection
  15. VDD Supply voltage range of 2.375V–3.46V
  16. VLOGIC at 1.8V±5% or VDD
  17. On-chip timing generator with ±1% frequency variation over the full temperature range
  18. 10,000g shock tolerant.

Package Includes:

1 x MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC

SKU: 162123 Categories: ,
Package/Case

QFN-24

Mounting Type

SMD/SMT

Sensitivity

340 LSB/C

Sensor Type

6-axis

Sensing Axis

X, Y, Z

Acceleration (g)

10000

Interface Type

I2C

Output Type

Digital

Maximum Supply Voltage (V)

3.46

Minimum Supply Voltage (V)

2.375

Max. Operating Current (mA)

3.9

Operating Temperature (°C):

-40 to 105

Dimensions in mm (LxWxH)

4x4x0.9

Shipping Weight 0.008 kg
Shipping Dimensions 8 × 6 × 3 cm
15 Days Warranty Against Sealed Product

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defect.  Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC”

There are no reviews yet.

datasheet

Questions and answers of the customers

  1. 0 votes
    A

    It means that the product you ordered comes in ... Read more

Only registered users are eligible to enter questions
Country Of Origin: China