HW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor

(3 customer reviews)
Availability:

In stock


SKU: 12038
  1. 3-axis Gyro+Acceleration+Magnetic Fiel
  2. Air Pressure Module
  3. Power supply: 3-5V
  4. Build in ultra low noise linear LDO voltage regulator
  5. Built-in onboard filters, which reduce noise from motor and other high current electronics
  6. You can easily select two I2C address for MPU6050 by soldered jumper

 585.00

(Including GST)

In stock

Select below products to add together

Male to Female Jumper Wires 40 Pin 30cm ₹ 63

New Price: ₹ 585


Purchase this product now and earn 6 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Generic
Category: IMU, Accelerometer, Magnetometer & Gyroscope
Tags: Robotic Sensors, Gyro Meter Magnetometer, accelerator, Magnetometer, Gyro, IMU, Inertial Measurement Unit, Robot Stabilizer, 10 DOF, Barometer

The HW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor has 3 in one MPU6050 3x Axis accelerometer sensor and 3x Axis gyroscope sensor, HMC5883L Triple Axis Magnetometer, BMP180 Barometric Pressure Sensor.

It possesses a built-in ultra-low noise linear LDO voltage regulator, built-in onboard filters, which reduce noise from the motor and other high current electronics. It has all sensors connected to the I2C bus, you can easily select two I2C addresses for MPU6050 by soldered jumper, power LED, and build in the Logic level converter for I2C.

There are different types of magnetometer are available; the basic differences between MPU6000, MPU6050 and MPU6500 is:

Difference Between Mpu 6050 Vs 6000 Vs 6500

MPU6050 :

The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms.

The parts’ integrated 9-axis MotionFusion algorithms access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor. Are the devices offered in the same 4x4x0.9 mm QFN footprint and pinout as the current MPU-3000? the family of integrated 3-axis gyroscopes, providing a simple upgrade path and making it easy to fit on space-constrained boards.

The InvenSense Motion Apps Platform that comes with the MPU-6050 abstracts motion-based complexities, offloads sensor management from the operating system and provides a structured set of APIs for application development. For precision tracking of both fast and slow motions, the parts feature a user-programmable gyro full-scale range of ±250, ±500, ±1000, and ±2000°/sec (DPS) and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g.

HMC5883 :

The HMC5883 is a surface mount multi-chip module designed for low field magnetic sensing with a digital interface for applications such as low-cost compassing and magnetometry. The HMC5883 includes our state-of-the-art, high-resolution HMC118X series magneto-resistive sensors plus Honeywell developed ASIC containing amplification, automatic degaussing strap drivers, offset cancellation, 12-bit ADC that enables 1° to 2°compass heading accuracy. Applications for the HMC5883 include Mobile Phones, Netbooks, Consumer Electronics, Auto Navigation Systems, and Personal Navigation Devices.

BMP180 :

This precision sensor is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! Using the sensor is easy.

The BMP180 is the next generation of sensors and replaces the BMP085. The good news is that it is completely identical to the BMP085 in terms of firmware/software – you can use our BMP085 tutorial and any example code/libraries as a drop-in replacement. The XCLR pin is not physically present on the BMP180 so if you need to know that data is ready you will need to query the I2C bus.

This board is 5V compliant – a 3.3V regulator and an I2C level shifter circuit are included so you can use this sensor safely with 5V logic and

APPLICATIONS:
  1. FPV, RC, and Robots systems
  2. GPS navigation systems
  3. Impact recognition and logging
  4. Gaming and virtual reality input devices
  5. Motion-activated functions
  6. Intelligent power saving for handheld devices
  7. Vibration monitoring and compensation
  8. Free-fall detection
  9. 6D-orientation detection

Note: You may receive the product with the name printed GY-87 or  HW-290, most probably it’ll be HW-290. Both are the same in functionality. Buy accordingly.

We also have a module with the same driver chips offering 9 degrees of freedom, click here!


Features :

  1. 3-axis Gyro+Acceleration+Magnetic Fiel
  2. Air Pressure Module
  3. Build-in ultra-low noise linear LDO voltage regulator
  4. Built-in onboard filters, which reduce noise from motor and other high current electronics
  5. You can easily select two I2C addresses for MPU6050 by soldered jumper
  6. Power LED
  7. Build in the Logic level converter for I2C
  8. Designed for 5V logic level

Package Includes :

1 x 10DOF HW-290/GY-87 Sensor Module.
1 x Straight pin Male header
1 x Curved pin Male header.

Type

GY-87

Driver IC

MPU6050+HMC5883L+BMP180

Operating Voltage (VDC)

3 ~ 5

Gyro range(°/s)

± 250, 500, 1000, 2000

Acceleration range(g)

± 2 ± 4 ± 8 ± 16

Communication

I2C Protocol

Length (mm):

22

Width (mm):

17

Weight (g):

5

Shipping Weight 0.01 kg
Shipping Dimensions 3.5 × 3 × 1.5 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 3 reviews

4.0 overall
1
1
1
0
0

Add a review

  1. Ali Umar (verified owner)

    The sensor works fine, the compass(magnetometer) is a clone chip (QMC)that works exactly like the original discontinued Honeywell chip(HMC)but requires one extra line of code to work, otw it will not register as an i2c device, the after sales support was excellent, they got me my answers pretty quickly when i got stuck trying to initialise this sensor ????

    Ali Umar

  2. Amit

    Magnetometer Chip is wrongly marked as HMC5883L. It actually is QMC5883L and has different I2C address and registers. Sensitivity of sensors is less. But you get what you paid for.

    Amit

  3. as096255 (verified owner)

    Working as expected. Robu is best.

    as096255

MPU6050 Datasheet

HMC5883 Datasheet

BMP180 Datasheet

QMC5883L-Datasheet

Questions and answers of the customers

  1. 0 votes
    Q Can this be used with stm32(3.3v) boards ? answer now
    Asked by barshan23 on February 21, 2022 7:46 pm
    A

    Yes, the HW-290/GY-87 10DOF module, which inclu... Read more

  2. 0 votes
    A Please mail us at [email protected] for further support... Read more
  3. 0 votes
    A

    There could be issue in the code or the hardwar... Read more

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…