Nokia 5110 LCD Display Module – Blue

(15 customer reviews)
Availability:

Out of stock

Approx Restocking Date: 20th April, 2024
SKU: 43888
  1. Power supply voltage: 2.7 V-3.3 V/5 V
  2. Data interface level: 2.7-5V.
  3. Resolution: 84 x 48 pixel
  4. Backlight power supply voltage: highest 3.3 V.
  5. Backlight: Blue.

 214.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Category: 16 x 2 LCD Display
Tags: LCD Display, LCD, Nokia, Nokiad 5110, Nokia 3310

The name of this product itself is enough to explain its origin. Yes of course !!! this LCD module was used in old Nokia 5110/3310 cell phones. Now it’s been widely used by hobbyists for graphics, text, etc.

Though it’s an industrial module, this LCD display is extremely easy to use. The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended as a cell phone screen.

This Nokia 5110 LCD Display Module is mounted on an easy-to-solder PCB. The Nokia 5110 LCD Module uses a Philips PCD8544 LCD driver, which is designed for mobile phones.

Nokia 5110 LCD Display Module is a low-cost monochrome LCD module comprised of 84 X 48 pixels that can be used to display rich graphics and text content. This module is a revision that accepts 3-5V input. So no extra level shifter is needed.

Interfacing with UNO Board:

Arduino Connection

It uses the PCD8544 controller, which is the same one used in the Nokia 3310 LCD. The PCD8544 is a low-power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface.

Pin Configuration :
  1. RSTreset
  2. CEchip selection
  3. DCdata/commands choice
  4. DINserial data line
  5. CLKserial Clock Speed.
  6. VCC3.3V
  7. LIGHTbacklight control terminal
  8. GNDpower negative
Operation of Nokia 5110 LCD Display Module at 3.3V 

Many devices that can be used with an Arduino, require a power supply of 3.3V. This is also the case with the Nokia 5110. The best way to deal with 3.3V devices is to take an Arduino Pro, which can run on 3.3V.

Thanks to the internal clamp of the PCD8544 we can use a very simple level shifter. Four current limiting resistors of 10kΩ can do the job. When an LCD control line is high, the current through the 10kΩ resistor is just 40uA, so this is harmless. Note that we can’t read back from the LCD with this circuit.

Operation of Nokia 5110 LCD Display Module at 5V

Because VDD max = 7V, the PCD8544 controller can handle 5V, but the Nokia 5110 LCD works best at 3.3V. The four resistors of 10kΩ avoid streaks on the LCD display. (at 5V the screen becomes somewhat black when tested)

To have full control, you just need 5 pins. And as a classic display module among open source communities, Robu.in is giving you the handful of related tutorials available over the Internet. So there is no need to panic even if you just got your foot in the door.


Features :

  1. 84 X 48 dot matrix LCD, can show 4 lines of characters.
  2. Use serial interface communicate with the master processor, the number of interface signal lines reduced greatly, only 8 signal lines including power and GND.
  3. Support different types of MCU, such as the Arduino, AVR, SPI, MCS51, and so on.
  4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.
  5. Can use the conductive glue to connect the module to the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
  6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small.
  7. Low power supply, the working current in a normal situation is lower than 200µA and has the power-down mode.
  8. “LIGHT” linked with GND, the backlight to be lit.
  9. Need you to compress the screen and PCB tighter, might be got loose after the delivery.
  10. Use a 3.3V controller, otherwise, the display could be quite vague.

Package Includes :

1 x Nokia 5110 LCD Display.


Tutorial :

How to use Nokia 5110 LCD Module

Driver IC

PCD8544

Backlight

Blue

Input Voltage (V)

2.7 to 3.3

Pixel Resolution

84 x 48

PCB Size ( L x W ) mm

45.5 x 43.5

Motor Mounting Holes Dia. (mm)

2

Shipping Weight 0.02 kg
Shipping Dimensions 6 × 6 × 1.5 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 15 reviews

4.4 overall
10
2
2
1
0

Add a review

  1. arr.mohd (verified owner)

    For Those who are looking for Raspberry Pi Support just follow this simple Tutorial. It will work like Charm!

    https://www.e-tinkers.com/2017/11/how-to-use-lcd-5110-pcd-8544-with-raspberry-pi/

    arr.mohd

  2. xbox123456789gamer (verified owner)

    The display has lots of scratches. I also got it replaced and still recived one with lots of scratches. The first one also had connection issues which is not letting it run at full brightness

    xbox123456789gamer

  3. Haripranesh

    The product is not too good as the zebra connectors are very loose and the display is showing light pixels due to loose connection. When the display is pressed the pixel comes good.

    Haripranesh

  4. aashish.lok (verified owner)

    Functioning product, but cheap quality! Zebra strip connecting to LCD panel can get loose easily. But better choice than ordinary 2 or 4 line LCD screen as this one can manage graphics.

    aashish.lok

  5. koushik (verified owner)

    product is nice but I expected a display with light but it’s not there. Apart from that everything is fine.

    koushik

  6. Vineet Ranjan (verified owner)

    Price is low compared to other places. Working as expected.

    Vineet Ranjan

  7. pankajgharai (verified owner)

    Good product Fast delivery. Robu.com always sends in a very good packaging

    pankajgharai

  8. cyberlaunch (verified owner)

    Perfect for my project. Value for money & works as expected.

    cyberlaunch

  9. cyberlaunch (verified owner)

    Perfect for my project. Value for money & works as expected.

    cyberlaunch

  10. Sunil Chandra (verified owner)

    Good product.

    Sunil Chandra

  11. Vishnu haran (verified owner)

    Nice product and reached without damage. Tq Robu. In

    Vishnu haran

  12. VIMAL PANDYA (verified owner)

    good

    VIMAL PANDYA

  13. gadget fever (verified owner)

    awesome product working very well and the best service of robu.in

    gadget fever

  14. singh (verified owner)

    Good Service But I have not received actual product, the display light was change…

    singh

  15. Deepak Singh (verified owner)

    This is good site but i placed order of Nokia 5110 LCD blue color display, but i received white & slow lite display

    Thanks to Robu team for this order delivery…

    Deepak Singh

Datasheet

Wiring Diagram

Test Code

PCD8544 Library

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…