ODROID-N2L with 2GByte RAM

The ODROID-N2L is a powerful single-board computer (SBC) developed by Hardkernel, featuring a quad-core Cortex-A73 and dual-core Cortex-A53 CPU architecture. The board is designed to offer high-performance computing capabilities in a compact and energy-efficient package, making it an ideal solution for a wide range of applications, such as media center, gaming, home automation, and more. The ODROID-N2L board features 2GB of LPDDR4 RAM, which provides enough memory for most general-purpose computing tasks. It also comes with a built-in microSD card slot, allowing users to easily expand the onboard storage with up to 128GB of additional memory.

Features:

1. Smaller and neater form factor: 69 x 56mm
2. Small size allows for mounting inside a variety of small devices
3. Suitable for various standalone embedded system which don’t require Ethernet connectivity
4. Suitable for building robots, drones, arcade consoles, human-machine-interface devices, and many other applications
5. Faster and lower power consumption LPDDR4 RAM
6. Lightweight
7. Low cost

Specifications:

1. Processor: Quad-core Cortex-A73(2.2Ghz) and Dual-core Cortex-A53(2Ghz) ARMv8-A architecture with Neon and Crypto extensions
2. GPU: Mali-G52 GPU with 6 x Execution Engines (800Mhz)
3. Memory: LPDDR4 4GiB or 2GiB with 32-bit bus width
4. Storage: 1 x eMMC connector (8G, 16G, 32G, 64G, and 128G are available)
   1 x microSD slot (DS/HS modes up to UHS-I SDR104)
5. Networking: Optional WiFi or Ethernet USB adapters
6. Video: 1 x HDMI 2.0 (up to [email protected] with HDR, CEC, EDID)
   – Although the +5V Power pin is able to supply a minimum of 300mA, according to HDMI 2.0 specification, a sink shall not draw more than 50mA of current from the +5V Power pin.
7. Audio: 1 x HDMI digital output
   External I/O 1 x USB 3.0 Host port
   1 x USB 2.0 Host port
   1 x Debug serial console (UART)
   1 x MIPI DSI 4Lane (TBD)
   1 x Peripheral Expansion Header (40-pin, 2.54mm pitch)
8. External I/O: – 1 x SPI
   – 1 x UART
   – 2 x I2C
   – 25 x GPIO (Max)
   – 2 x ADC input (10bit, 1.8V Max)
   – All of I/O signal level is 3.3 Volt except for ADC input at max 1.8 Volt
9. Power:  1 x DC jack: outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
   7.5V ~ 16V (Recommend a range of input)
   – DC 12V/2A power adapter is recommended power consumption:
   – IDLE : ≃ 1.5W (Performance governor), 1.3W(Conservative governor)
   – CPU Stress (Passive Heat-Sink) : ≃ 5.4W (@1908/2208MHz, Stock), 5.8W (@2016/2400MHz, Overclock)
   – CPU Stress (Active Cooling-FAN) : ≃ 6.1W (@1908/2208MHz, Stock), 6.4W (@2016/2400MHz, Overclock)
   – Power-Off: ≃ 0.2W

Package Includes: 

1 x ODROID-N2L with 2GByte RAM