Flip32 OMNIBUS F4 Flight Controller

(1 customer review)
Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 127316
  1. 128Mb Flash(16M Byte)
  2. SBUS/PPM input (Pinheaders)
  3. DSM/DSM2/DSMX input(Plug)
  4. 6PWM output (Pinheaders)
  5. Only 36x36mm, mount holes 30.5×30.5mm
  6. All through hole pin header Design  -no Sh connectors
  7. STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
  8. Works Perfect with Raceflight or BetaFlight 3.0

 2,599.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Category: Flight Controller & Accessories

Flip32 OMNIBUS F4 Flight Controller is new generation F4 hardware flight controller for FPV race with STM32F405 MCU.

The Flip32 Omnibus flight controller uses the MPU6000 over SPI for the best possible flight performance. Along with the MPU6000 are a and an AB7456 OSD chip (an upgraded MAX7456) for the beta flight integrated OSD. You won’t need a PDB with this build because there is a high-performance 5v, 1.5a STMicrocontroller L78 voltage regulator, so you can plug the flight battery right into the flight controller. The  Flip32 Omnibus flight controller the first  F4 Flight controller with a MAX7456 OSD chip directly connected to the flight controller, so it can be configured from the beta flight configurator.  A new generation AIO Flight control for FPV. Based on the F403 MCU and uses F4 MCU controls for OSD over SPI bus in DMA mode.

The Flip 32 OmnibusF4 flight controller is an integrated flight controller and OSD specifically designed for ease of use and outstanding flight performance. The MPU6000 inertial motion sensor was chosen for its high reliability, accuracy and update speed. This board has no problem running fast loop times and ESC protocols. There is an onboard for altitude sensing along with an On Screen Display (OSD) chip directly connected to the main processor (MCU). This tight integration between the MCU and the OSD enables fast updates to the display and easy configuration of the OSD, which is managed straight from the beta flight configuration tool. You no longer need to worry about the extra hassle of configuring your OSD with a USB/UART adapter and 3rd party configuration tool, it’s all built into the flight control software.

The Flip 32 OmnibusF4 was designed to work specifically with BorisB’s amazing BetaFlight firmware. Boris is a control system expert and has implemented his own “ISA-PID compensator” based PID controller, called the beta flight PIDc, that gives an almost-predictive control for that super locked-in stick feeling. Download the beta flight configurator to flash and configure your quadcopter here: https://chrome.google.com/webstore/detail/betaflight-configurator/kdaghagfopacdngbohiknlhcocjccjao

Finally, for maximum ease of use, the Flip 32  OmnibusF4 has an onboard voltage regulator that can easily handle up to a 5s battery. No need to mess with a PDB, just plug your battery straight into the flight controller and you’re ready to go! Along with the robustly engineered power management system on the OmnibusF4, special precautions have been taken to ensure that the sensitive OSD chip is well protected, so you don’t have to worry about any problems with your OSD. even on 5s!

 

Microsoftteams Image 55 1

 

 


Features:

  1. Buzzer Port and LED strip Port
  2. 128Mb Flash(16M Byte)
  3. SBUS/PPM input (Pinheaders)
  4. DSM/DSM2/DSMX input(Plug)
  5. 6PWM output (Pinheaders)
  6. Only 36x36mm, mount holes 30.5×30.5mm
  7. All through hole pin header Design  -no Sh connectors
  8. STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
  9. Works Perfect with Raceflight or BetaFlight 3.0
  10. direct Lipo input: 1.5A  Built-in onboard regulator – NO BEC needed.
  11. Connect directly to a Lipo to power the board and Rx
  12. RaceFlight or Beta flight support on an STM32 F3 with an SPI based MPU6000
  13. gyro – low noise gyro will not force one to soft-mount the fc
  14. Dshot support (Need to update the firmware to Beta flight 3.1 target AirbotF4)

Useful Links:

Betaflight – Configurator


Package Includes:

1 x Flip32 OMNIBUS F4 Flight Controller

1 x Connecting Cable

1 x 3*10 Header Pins (Straight)

1 x 2*5 Header Pins (Straight)

SKU: 127316 Category:
Model

Flip32 OMNIBUS F4

Input Voltage (V)

5 VDC

Firmware

Beta Flight 3.1.7_OMNIBUSF4SD

Sensor

MPU6000 SPI Bus

Processor

STM32F405 MCU.

Micro-SD Card Slot

No

Dimensions in mm (LxWxH)

36 x 36 x 7

Weight (g):

5

Shipping Weight 0.01 kg
Shipping Dimensions 5 × 5 × 1 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Arunansh Barai (verified owner)

    This is a modern f4 flight controller, this are better suited for drones than those old kk 2.1.5 controllers. also to mention that betaflight has stopped active development of f3 boards so it is better to avoid models like spracing f3 boards.this are of good build quality and support dshot, proshot, multishot etc. Good how to videos on this board is available in youtube under PROJECT BLUE FALCON’S playlist of omnibus f4. Also to mention Robu.in’s very fast and quick delivery. this guys also have an awesome support so better buy it from here than banggood if you are in India this saves you from the hassle of customs.

    Arunansh Barai

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China