Orange 600 PPR ABZ 3-Phase Incremental Magnetic Rotary Encoder

Availability:

In stock


SKU: 232566
  1. Encoder Type: Magnetic
  2. IP54 (IEC Standard) Protection
  3. Stainless Steel Shaft
  4. High-Quality 2-Meter Cable
  5. Anti-jamming Performance
  6. 3-Phase Output for More precise Readings
  7. Small size, lightweight for Easy Installation

 2,890.00

(inc GST)

₹ 2449.15 (+18% GST extra)

In stock

Select below products to add together

GT2 Timing Belt 200mm Width-6mm Closed-Loop Rubber Belt for 3D Printer ₹ 149
GT2-6mm Belt Width 60 teeth 8mm Bore Aluminium Timing Pulley ₹ 263

New Price: ₹ 2890


Purchase this product now and earn 29 Robu Points!
Brand: Orange
Category: Rotary Encoder
Tags: Rotary Encoder, encoder, Optical Encoder, Orange Premium Optical Rotary Encoder

If you want to build a project where the machine can control the speed of the conveyer belt as well as the direction of movement, a rotary encoder is a must-have component. Keeping this in mind, Robu.In is introducing the brand new orange 600 PPR ABZ 3-Phase Incremental Optical Rotary Encoder at a competitive price.

A rotary encoder is a type of position sensor which is used for determining the angular position of a rotating shaft. It generates an electrical signal, either analog or digital, according to the rotational movement.

Orange 600 PPR Incremental Magnetic Rotary Encoder is a hi-resolution magnetic encoder with quadrature outputs for increment counting. It will give 2400 transitions per rotation between outputs A and B. whereas the Z phase will produce one transition per rotation. A quadrature decoder is required to convert the pulses to an up count. The Encoder is built to Industrial grade.

The Encoder comes with a Standard 2-meter long cable which can be extended with extra cable if needed.

Consider Adding Pull up resistor to All A-B-Z phases of the encoder output to avoid the effect of interference in output and get the precise logical output value from the encoder. Also adding a pull-up resistor to all phase output lines protects the open collector output-triode from damage due to direct Vcc supply short circuit.

Note: A sample tutorial code has been given in the Description.


Power and Input Terminal Assignments:
Terminal Name Wire Color Description
Phase A White Quadrature encoded output A
Phase B Green Quadrature encoded output B
Phase Z Yellow Quadrature encoded output Z
VCC Red VCC should be connected to +ve 5V of supply
GND Black The ground should be connected to negative the supply
Shield Golden The shield should be connected to GND

Shielding is important. At a minimum, the cable should be protected either by a foil jacket with a drain wire or by a braided-wire shield that is grounded. For very sensitive applications or high-EMI environments, foil jacketed wires in combination with an overall braided-wire shield around the cable should be used to avoid interference and precise encoder output.

To Explore More Rotary Encoders, Click here


Features :

  1. High cost-efficient advantages.
  2. Incremental rotary encoder internal adopts ASIC devices
  3. High reliability, long life
  4. Anti-jamming performance
  5. Small size, lightweight, compact structure
  6. Easy installation
  7. Stainless steel shaft, High resolution, High quality, line interface with waterproof protection

Tutorial Code:

//these pins can not be changed 2/3 are special pins
int encoderPin1 = 2;
int encoderPin2 = 3;

volatile int lastEncoded = 0;
volatile long encoderValue = 0;

long lastencoderValue = 0;

int lastMSB = 0;
int lastLSB = 0;

void setup() {
  Serial.begin (9600);

  pinMode(encoderPin1, INPUT); 
  pinMode(encoderPin2, INPUT);

  digitalWrite(encoderPin1, HIGH); //turn pullup resistor on
  digitalWrite(encoderPin2, HIGH); //turn pullup resistor on

  //call updateEncoder() when any high/low changed seen
  //on interrupt 0 (pin 2), or interrupt 1 (pin 3) 
  attachInterrupt(0, updateEncoder, CHANGE); 
  attachInterrupt(1, updateEncoder, CHANGE);

}

void loop(){ 
  //Do stuff here

  Serial.println(encoderValue);
  delay(1000); //just here to slow down the output, and show it will work  even during a delay
}


void updateEncoder(){
  int MSB = digitalRead(encoderPin1); //MSB = most significant bit
  int LSB = digitalRead(encoderPin2); //LSB = least significant bit

  int encoded = (MSB << 1) |LSB; //converting the 2 pin value to single number
  int sum  = (lastEncoded << 2) | encoded; //adding it to the previous encoded value

  if(sum == 0b1101 || sum == 0b0100 || sum == 0b0010 || sum == 0b1011) encoderValue ++;
  if(sum == 0b1110 || sum == 0b0111 || sum == 0b0001 || sum == 0b1000) encoderValue --;

  lastEncoded = encoded; //store this value for next time
}

Package Includes :

1 x Orange 600 PPR ABZ 3-Phase Incremental Magnetic Rotary Encoder

4 x 4.7KΩ Resistors for pull-ups

1 x Mounting Screw Set

Model No.

3806-MAGI-600-ABZ-OC

Encoder Type

Incremental

Operating Voltage (VDC)

5 ~ 24

Current Consumption (mA)

≤40

Maximum Speed

5000 RPM

Pulse Per Revolution (PPR)

600

Counts Per Revolution (CPR)

2400

Operating Temperature Range (°C)

-24 to 84

Output Phase

A-B-Z

Protection Standard

IP54

Shaft Type

D-type
Solid

Shaft Length (mm)

12

Shaft Diameter (mm)

6

Mounting Hole(mm)

M3

Weight (gm)

160

Body Dimensions (Dia. x Length) mm

40 x 38.40

Cable Length (Meter)

2

Shipment Weight

0.19 kg

Shipment Dimensions

10 × 8 × 10 cm

6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Orange 600 PPR ABZ 3-Phase Incremental Magnetic Rotary Encoder”

There are no reviews yet.

User Manual

Dimensional Drawing

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions

You may also like…