Original Arduino MKR Wifi 1010 Board


In stock

SKU: 779407
  1. Microcontroller: SAMD21 Cortex-M0+ 32-bit low-power ARM MCU
  2. Digital I/O Pins: 8
  3. PWM Pins: 12
  4. Flash Memory: 256 KB
  5. SRAM: 32 KB
  6. Board Power Supply (USB/VIN): 5V


(inc GST)

₹ 2668.64 (+18% GST extra)

In stock

Prices shown above are Inclusive of GST

Purchase this product now and earn 32 Robu Points!
Brand: Arduino
Category: Original Arduino Boards and Shields
Tags: Original Arduino

The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It’s equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi-based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.

Pinout diagram:

Arduino MKR Wifi 1010

This thin board has been designed to offer a practical and cost-effective solution for makers to design IoT projects with minimal previous experience in networking. It is based on the low power Arm® Cortex®-M0 32-bit SAMD21, which is part of the Arduino MKR family. Wireless devices specifically designed for the Internet of Things (IoT).


  1. Digital I/O Pins: 8
  2. PWM Pins: 12
  3. Flash Memory: 256 KB
  4. SRAM: 32 KB
  5. Microcontroller: SAMD21 Cortex-M0+ 32-bit low-power ARM MCU
  6. Board Power Supply (USB/VIN): 5V
  7. Full-speed USB device and embedded host
  8. Pre-mounted headers with pin-out

Package Includes:

1 x Original Arduino MKR Wifi 1010 Board


SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet)

Radio module

u-blox NINA-W102 (datasheet)

Board Power Supply


Secure Element

ATECC508 (datasheet)

Supported Battery

Li-Po Single Cell, 3.7V, 1024mAh Minimum

Circuit Operating Voltage


Digital I/O Pins


PWM Pins

13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)


1 x UART
1 x SPI
1 x I2C

Analog Input Pins

7 (ADC 8/10/12 bit)

Analog Output Pins

1 (DAC 10 bit)

External Interrupts

8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)

DC Current per I/O Pin

7 mA


CPU Flash Memory 256 KB (internal)

Clock Speed

32.768 kHz (RTC), 48 MHz



Length (mm)

61.5 mm

Width (mm)

25 mm

Weight (gm)


Shipment Weight

0.05 kg

Shipment Dimensions

8 × 4 × 2 cm

1 Month Warranty Against Sealed Product

This item is covered with a standard warranty of 1 Month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Arduino MKR Wifi 1010 schematic

Eagle files

Fritzing File

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions