Pixhawk PX4 2.4.7 32Bits Flight Controller for Quadcopter Multicopter

(1 customer review)
Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 28968
  1. Processer:32bit STM32F427 Cortex M4,32-bit STM32F103
  2. Model: PX4
  3. Input Voltage:6-10 V
  4. RAM:256 KB

 

 12,999.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Category: Flight Controller & Accessories

Are you want to be an Electronic Geek in the future and want to build your own drone then this Flight controller is best for you. The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC’s), which translates this desired speed into a signal that the motors can understand.

Pixhawk PX4 2.4.7  32Bits Flight Controller for Quadcopter Multicopter board is a new Version Redeveloped and optimized circuit without changing components integrated with PX4FMU+PX4IO. Pixhawk is with a new 32-bit chip and sensor technology. It detects and configures all its peripherals automatically The benefits of the Pixhawk system include a Unix/Linux-like programming environment, completely new autopilot functions. Sophisticated scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes.

It’s an Advanced 32 bit CortexM4 ARM high-performance processor, can run RTOS NuttX real-time operating system. Integrated backup power supply and failure backup controller. The main controller can be safely switched to backup control. It can Provide redundant power input and fault transfer functions.

US interface UART, I2C, SPI, CAN Provide automatic and manual mode.14 x  PWM/ actuator output. Color LED lamp. Multi-tone buzzer interface.Micro SD to record flight data

Pixhawk

Options:
  1. PPM encoder for RC receivers that do not provide PPM output
  2. External USB and LED module for convenient status indicator and micro-USB port on your vehicle
  3. Digital airspeed sensor for fixed-wing aircraft
  4. Telemetry radios with one-mile range for two-way control, telemetry, and data logging via free mobile apps or PC/Mac/Linux ground station
  5. u-blox GPS with compass (required for autonomous flight)
Softwares :

Official MissionPlanner, ECLIPSE firmware

 

Microsoftteams Image 55 1

 


Features :

Processor :

  1. 32bit STM32F427 Cortex M4 core with FPU
  2. 168 MHz
  3. 256 KB RAM
  4. 2 MB Flash
  5. The 32-bit STM32F103 failsafe co-processor

Sensors:

  1. ST Micro L3GD20H 16 bit gyroscope
  2. ST Micro 3CLDW 303H 14 bit accelerometer/magnetometer
  3. Invensense MPU 6000 3-axis accelerometer/gyroscope
  4. MEAS MS5611 barometer

Interfaces:

  1. 5x UART (serial ports), one high-power capable, 2x with HW flow control
  2. 2x CAN (one with an internal 3.3V transceiver, one on expansion connector)
  3. Spektrum DSM / DSM2 / DSM-X® Satellite compatible input
  4. Futaba S.BUS® compatible input and output
  5. PPM sum signal input
  6. RSSI (PWM or voltage) input
  7. I2C
  8. SPI
  9. 3.3 and 6.6V ADC inputs
  10. The internal micro USB port and external micro USB port extension

Power System and Protection :

  1. Ideal diode controller with automatic failover
  2. Servo rail high-power (max. 10V) and high-current (10A+) ready
  3. All peripheral outputs over-current protected, all inputs ESD protected

Highlights:

  1. New Version Redeveloped and optimized circuit without changing components
  2. 168 MHz / 252 MIPS Cortex-M4F
  3. 14 PWM / Servo outputs (8 with failsafe and manual override, 6 auxiliaries, high-power compatible)
  4. Abundant connectivity options for additional peripherals (UART, I2C, CAN)
  5. Integrated backup system for in-flight recovery and manual override with a dedicated processor and stand-alone power supply (fixed-wing use)
  6. The backup system integrates mixing, providing consistent autopilot and manual override mixing modes (fixed-wing use)
  7. Redundant power supply inputs and automatic failover
  8. External safety switch
  9. Multicolor LED main visual indicator
  10. High-power, multi-tone piezo audio indicator
  11. MicroSD card for high-rate logging over extended periods of time

Package Includes:

1 x Pixhawk V2.4.7 Flight board with Original Shell
1 x Teflon safety switch
1 x Buzzer

SKU: 28968 Category:
Model

PX4 2.4.7

Input Voltage (V)

6 ~ 10 V, 10A Max

Firmware

MissionPlanner, ECLIPSE firmware upgrade

Port

5x UART (serial ports), One high-power capable, 2x with HW flow control, 2x CAN

Sensor

Magnetometer, MEAS MS5611 barometer, ST Micro 3CLDW 303H 14 bit Accelerometer, ST Micro L3GD20H 16 bit gyroscope

Processor

32bit STM32F427 Cortex M4 core with FPU, The 32-bit STM32F103 failsafe Co-processor

Micro-SD Card Slot

Yes

Weight (g):

39

RAM

256 KB

Dimensions in mm (LxWxH)

82 x 16 x 50

Shipping Weight 0.039 kg
Shipping Dimensions 8 × 5 × 4 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

4.0 overall
0
1
0
0
0

Add a review

  1. umeshrj29

    It works perfectly. Only issue is the telemetry and gps df16 connectors on flight controller doesn’t fit perfectly, I have even tried different cables but still problem exists maybe the df16 port on fc is defective. Everything else is great.

    umeshrj29

Firmware Installation

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…