PL2303HX SSOP28 USB-to-Serial Bridge Controller IC (Revision A)

Availability:

In stock


SKU: 557997
  1. Fully Compliant with USB Specification v2.0 (Full-Speed).
  2. On-Chip USB 1.1 transceiver, 5V ~ 3.3V regulator, and 12 MHz crystal oscillator.
  3. Supports RS232-like Serial Interface.
  4. Configurable 512-byte bi-directional data buffer.
  5. Supports remote wake-up from MODEM input signals.
  6. Two general-purpose I/O (GPIO) pins.
  7. Small footprint 28-pin SSOP IC package.
  8. RoHS compliant.

 85.00

(Including GST)

In stock

Purchase this product now and earn 1 Robu Point!

Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Category: Interface ICs

PL2303HX SSOP28 USB-to-Serial Bridge Controller IC provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL-2303HXA highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.

By taking advantage of USB bulk transfer mode, large data buffers, and automatic flow control, PL-2303HXA is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. When real RS232 signaling is not required, the baud rate higher than 115200 bps could be used for even higher performance. The flexible baud rate generator of PL-2303HXD could be programmed to generate any rate between 75 bps to 6M bps.

PL-2303HX is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit into any connectors and handheld devices. With very small power consumption in either operating or suspend mode, PL-2303HXA is perfect for bus-powered operation with plenty of power left for the attached devices. A flexible signal level requirement on the RS232-like serial port side also allows PL-2303HXA to connect directly to any 3.3V~1.8V range devices.

Note: Image may vary from actual product in terms of Manufacturer/Brand name according to the availability. 


  Features:

  1. Fully Compliant with USB Specification v2.0 (Full-Speed).
  2. On-Chip USB 1.1 transceiver, 5V ~ 3.3V regulator, and 12 MHz crystal oscillator.
  3. Supports RS232-like Serial Interface.
  4. Extensive Flow Control Mechanism.
  5. Configurable 512-byte bi-directional data buffer.
  6. Supports remote wake-up from MODEM input signals.
  7. Two general-purpose I/O (GPIO) pins.
  8. Optional external EEPROM for startup device configurations.
  9. Provides drivers support for Windows, Mac OS, Linux, and WinCE.
  10. Designed for Windows XP, Vista, 7 Certified Logo Drivers.
  11. USB-IF Logo Compliant with TID 40002448.
  12. Small footprint 28-pin SSOP IC package.
  13. RoHS compliant.

Package Includes:

1 x PL2303HX SSOP28 USB-to-Serial Bridge Controller IC (Revision A).

SKU: 557997 Category:
Minimum Supply Voltage (V)

3.6

Maximum Supply Voltage (V)

5.5

Max. Operating Current (mA)

10

Product Type

USB Bridge Controllers

Product Series

PL2303HX

Maximum Clock Frequency (MHz)

12.024

Interface Type

UART

Operating Temperature (°C):

-40 to 85

Mounting Type

SMD/SMT

No. of I/Os

2

Shipping Weight 0.06 kg
Shipping Dimensions 8 × 6 × 3 cm
15 Days Warranty Against Sealed Product

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defect.  Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PL2303HX SSOP28 USB-to-Serial Bridge Controller IC (Revision A)”

There are no reviews yet.

Datasheet

Questions and answers of the customers

  1. 0 votes
    Q hi ,, can i get 500 pcs price for PL2303HXD answer now
    Asked by Harshad Patel on November 23, 2020 11:13 am
    Answered by the admin Sir, please write your inquiry to [email protected], ou... Read more
Only registered users are eligible to enter questions
Country Of Origin: China