Pololu DRV8834 Low-Voltage Stepper Motor Driver Carrier


Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 1607671
  1. Built-in regulator (no external logic voltage supply needed)
  2. Short-to-ground, short-to-supply, and shorted-load protection
  3. 4-layer, 2 oz copper PCB for improved heat dissipation
  4. Exposed solderable ground pad below the driver IC on the bottom of the PCB
  5. Simple step and direction control interface


(Including GST)

Out of stock

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: Pololu
Category: Pololu Motor Drivers

This is a breakout board for TI’s DRV8834 micro-stepping bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of our A4988 Carriers, so it can be used as a drop-in replacement for those boards in many applications. The DRV8834 operates from 2.5–10.8 V, allowing stepper motors to be powered with voltages that are too low for other drivers, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features adjustable current limiting, overcurrent and overtemperature protection, and six micro-step resolutions (down to 1/32-step). This board ships with 0.1″ male header pins included but not soldered in.

This product is a carrier board or breakout board for TI’s DRV8834 low-voltage stepper motor driver; we, therefore, recommend careful reading of the DRV8834 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. This product ships with all surface-mount components—including the DRV8834 driver IC—installed as shown in the product picture.

Note: For more technical data refer the attached datasheet


  1. Simple step and direction control interface
  2. Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  3. Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  4. 2.5-10.8 V supply voltage range
  5. Built-in regulator (no external logic voltage supply needed)
  6. Can interface directly with 3.3 V and 5 V systems
  7. Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
  8. Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects.

Pololu Capture 1

Package Includes:

1 x Pololu DRV8834 Low-Voltage Stepper Motor Driver Carrier

SKU: 1607671 Category:
Minimum operating voltage


Maximum operating voltage


Continuous current per phase

1.5 A

Maximum current per phase

2 A

Minimum logic voltage

2.5 V

Maximum logic voltage

5.5 V

Microstep resolutions

full, 1/2, 1/4, 1/8, 1/16, and 1/32

Reverse voltage protection


Header pins soldered


Shipping Weight 0.015 kg
Shipping Dimensions 11 × 9 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall

Be the first to review “Pololu DRV8834 Low-Voltage Stepper Motor Driver Carrier”

There are no reviews yet.


Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: United States