Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino

(13 customer reviews)
Availability:

In stock


SKU: 110787
  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection

 446.00

(Including GST)

In stock

Select below products to add together

USB type A to Micro USB Cable ~1meter ₹ 67

New Price: ₹ 446


Purchase this product now and earn 5 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Category: Boards Compatible with Arduino
Tags: Arduino, Development Board, Arduino Nano, Arduino Pro Micro, Pro Micro, Arduino Leonardo, ATmega32U4, Pro-micro Leonardo

This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.

There is a voltage regulator on board, so it can accept up to 12V DC.

The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.


Features :

  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection.

Pin Diagram:

5V/16Mhz Pro Micro Atmega 32U4 Board Bootloader For Arduino Leonardo


Package Includes :

1 x Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino

Microcontroller

ATmega32U4

Input voltage

7-12V

Operating Voltage (VDC):

5

Input Voltage (limits)

6-20V

Analog I/O Pins

12

Digital I/O Pins

20

DC Current per I/O Pin (mA)

20

DC Current for 3.3V Pin (mA)

50

PWM Pins

7

Flash Memory

32 KB

EEPROM

2.5KB

SRAM

1

Clock Speed

16 MHz

Dimensions (LxWxH) mm

48x18x8

Weight (g):

13

Shipping Weight 0.06 kg
Shipping Dimensions 8 × 6 × 4 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 13 reviews

5.0 overall
13
0
0
0
0

Add a review

  1. usamah.kamil (verified owner)

    Exactly what I required for a DIY project. Good price. Great quality.

    usamah.kamil

  2. arunsmailid4u (verified owner)

    The product works as intended and the delivery was also prompt.

    arunsmailid4u

  3. mitalighosh.19.mid (verified owner)

    Very good product and cheaper than any other seller.
    Also very good packaging.

    mitalighosh.19.mid

  4. purchase (verified owner)

    best

    purchase

  5. bittumadala2 (verified owner)

    was first worried about robu in and their products as they were cheap compared to amazon and ordered a pro micro and they surprised me and delivered it in 2 days and even helped me in other products also,

    i am going to recommend this site to my friends also and the product is good

    bittumadala2

  6. getruturaj (verified owner)

    Working
    very compact and perfect fit in my project

    getruturaj

  7. deepeshyadav.dev (verified owner)

    Works flawlessly!

    deepeshyadav.dev

  8. Parmjit Singh (verified owner)

    working well overall very good

    Parmjit Singh

  9. Saravanan Rajasekharan (verified owner)

    Best product, would recommend

    Saravanan Rajasekharan

  10. HEMANTA KUMAR BISWAS (verified owner)

    Best product best price??

    HEMANTA KUMAR BISWAS

  11. Vishal halder (verified owner)

    Great product i received withn 5 days
    Thanku guys i was looking for this products since 6 months finally thanks
    Please gift me Raspberry pi zero

    Vishal halder

  12. rajavn6789 (verified owner)

    Purchased this to use Logitech gear shifter with PC, since the joystick library supports only ATMEGA32U4 boards. Good packaging and good delivery. Pro micro is plug and play no need to install any manual drivers to be detected.

    rajavn6789

  13. Jr Sarath (verified owner)

    Never seen such delivery speed, this company uses fedEx as their delivery partner, superfast delivery (next day), product is described, super support, product was as expected and well packaged

    Jr Sarath

Schematic

Questions and answers of the customers

    does it come with header pins
  1. 0 votes
    Q does it come with header pins answer now
    Asked by omgoyal2711outlook.in on March 10, 2024 10:43 pm
    A Yes, it comes along with header pins but they are ... Read more
  2. can it use supply from USB port?
  3. 0 votes
    Q can it use supply from USB port? answer now
    Asked by chintanshah.710 on March 31, 2023 5:19 pm
    A Yes, you can give 7-12V input voltage from the USB... Read more
  4. I want to flash qmk firmware on the board. So, How... Read more
  5. 0 votes
    Q I want to flash qmk firmware on the board. So, How do I put the board into bootloader mode? I tri...... Read more answer now
    Asked by vikasraj1911 on March 17, 2023 6:14 pm
    A Hello, for your query related to connections kindl... Read more
  6. What driver do I need to interface it with my comp... Read more
  7. 0 votes
    Q What driver do I need to interface it with my computer ? I have latest version of arduino. answer now
    Asked by pranayhello111 on August 27, 2022 9:29 pm
    A You have to interface it with your PC using Arduin... Read more
  8. When are you expected to re-stock?
  9. 0 votes
    Q When are you expected to re-stock? answer now
    Asked by yaseen on August 21, 2020 9:28 pm
    A please drop us a mail on [email protected] regarding th... Read more
  10. Would it be possible to get the board with pre-att... Read more
  11. 0 votes
    Q Would it be possible to get the board with pre-attached pins? answer now
    Asked by lakshay.ahooja on December 4, 2019 7:48 pm
    A No, the board doesn't come with soldered pins, but... Read more
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…