RAMPS 1.4 3D Printer Controller+Mega2560 with Cable compatible with Arduino +5Pcs A4988 Driver With Heat Sink+LCD 2004 Display Kit

Availability:

In stock


SKU: 33269
  1. USB type B receptacle.
  2. SD Card adds on available.
  3. Fits 5 Pololu stepper driver board.
  4. LEDs indicate when heater outputs on.
  5. Expandable to control other accessories.
  6. Heated bed control with an additional 11A fuse.

 3,045.70

(Including GST)

In stock

Purchase this product now and earn 31 Robu Points!

Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Category: DIY 3D Printer Kits

The RAMPS 1.4 3D Printer Controller+Mega2560 with Cable compatible with Arduino +5Pcs A4988 Driver With Heat Sink+LCD 2004 Display Kit is the new Robu.in 3D Printer Kit, develop specially for those who have interest in the 3D printer.

RAMPS 1.4 Board :

 The RAMPS 1.4 is Mega Pololu Shield, or RAMPS for, design to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be add to system. As long as the main RAMPS board is kept to the top of the stack.

Mega2560 Arduino :

Mega2560 is an ATmega2560 as core micro-controller development board itself has 54 groups digital I/O terminal (14 Pin PWM outputs). 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the boot-loader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery.

Driver A4988 :

A4988 driver is a carrier board or breakout board for A4988 DMOS Micro-stepping Driver with Translator and Over-current protection by Pololu. we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.

LCD 2004 graphic Smart Display :

LCD 2004 graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 20×04 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” include.

After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design store on the SD card.

We also have a variety of 3D Printers and accessories from the Brand CREALITY  at the best price in INDIA,

Click Here to explore. 


Package Includes :

1 x RAMPS 1.4 3D Printer controller Board.

1 x Mega 2560 with Cable.

5 x A4988 stepper motor driver with heat sink.

1 x LCD 2004 Display board.

1 x Smart Adapter.

2 x 30cm FRC Cable.


Specifications and Features :

  1. USB type B receptacle.
  2. SD Card adds on available.
  3. Fits 5 Pololu stepper driver board.
  4. LEDs indicate when heater outputs on.
  5. Expandable to control other accessories.
  6. Heated bed control with an additional 11A fuse.
  7. Option to connect 2 motors to Z for Prusa Mendel.
  8. I2C and SPI pins left available for future expansion.
  9. It has provisions for the cartesian robot and extruder.
  10. All the Mosfets are hook into PWM pins for versatility.
  11. 3 mosfets for heater / fan outputs and 3 thermistor circuits.
  12. Fused at 5A for additional safety and component protection.
  13. These boards are on pin header sockets so they can be replace easily or remove for use in future designs.
  14. Servo style connectors are use to connect to the end stops, motors, and led. These connectors are gold plated, rated for 3A, very compact, and globally available.
SKU: 33269 Category:
Item Type

Controller Kit

Driver

A4988

Microcontroller

ATmega2560

LCD Screen

20 x 4

Shipping Weight 0.58 kg
Shipping Dimensions 10 × 7 × 5 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “RAMPS 1.4 3D Printer Controller+Mega2560 with Cable compatible with Arduino +5Pcs A4988 Driver With Heat Sink+LCD 2004 Display Kit”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: American Samoa

You may also like…