This is a newly arrived very lightweight ABS case for Raspberry Pi 4 models. It is unassembled only 3-piece Smooth matt finished black ABS plastics case which provides adequate protection for your Pi and access to all the ports. The case is compatible with all the latest launched Raspberry pi 4 Models. It is very easy to assemble and de-assemble with accurately designed locking notches and 4 small screws to lock the case.
This case looks very premium with a round edge and accurate opening to each port of Pi 4. At the side, the case has a GPIO slot from which you can route GPIO and CSI ribbon cable and a cut-out to provide the ease with the micro SD card insertion and removal.
Exactly over the processor chip, there is a Cooling Fan slot and at the opposite side of USB ports, there is a nicely designed ventilation grill to provides ventilation to your pi for continuous operation. This ABS Case for PI 4 is also designed so that you can see the Pi status LEDs clearly, and you need not put any effort into fitting the pi inside the case, it fits the pi accurately just like the mobile phone cover.
Note: Raspberry Pi 4 board or Cooling fan is not included in the package.
Specifications and Features:
- Only 3-piece ABS case with access to all Ports on pi 4
- Compatible for All variants of the Raspberry pi 4 Model B
- Easy to assemble and highly durable material
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- locking screw holes and anti-slip rubber feet at the back.
1 x Acrylic Case for Raspberry PI 4 Model B with cooling Fan Slot
1 x Rubber Grips set
1 x Screw Set
Santosh (verified owner) –
Instead of 30mmX30mmX10mm cooling fan buy 30mmX30mmX07mm Fan. Heatsink creates problem with 30mmX30mmX10mm cooling fan.
umeshrj29 (verified owner) –
Nice case…… Perfect fit for pi 4b. Package contains only the case, u need to buy heat sinks and fan separately. The fan of size 3007 is perfect fit to this case. This case comes with small screws to attach the fan and slightly bigger screws for fixing the pi into this case. All the ports are accessible externally so u can connect the peripherals without opening the case.
Jk (verified owner) –
Ok..product serves its purpose
VIKRANT (verified owner) –
It’s feel solid construction and perfect port openings make this case a good choice for raspi pi 4, few small heatsinks come with this casing along with 4 silicone studs. Simply add a small 5 volt 30mmX30mm fan and it’s all done …it has opening and provision to hold fan too…it comes with screws to assemble the body unlike the original raspi casing that is snap type…..i prefer this over the orginal cuz of the fan port and easy access to GPIO port which the offical case lacks …
rsapru (verified owner) –
Good quality case