, ,

Refurbished – 3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi

(1 customer review)

In stock

SKU: R111168
  1. Version: V4.0
  2. Resistive touch.
  3. Dimension: 3.2 inch.
  4. Operating Voltage: DC 5V.
  5. Driver: XPT2046.
  6. Resolution: 240 x 320.


(Including GST)

In stock

Purchase this product now and earn 12 Robu Points!

Very Low Stock. Order Now !

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Category: Refurbished, Refurbished Electronic Modules and Displays, Refurbished & Partial Working
Tags: Raspberry pi dispaly, LCD Display, LCD, SPI, TFT, TFT Display, Touchscreen Displays, Touchscreen, Raspberry Pi

This is Refurbished – 3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi

Below is the link If you want a brand new https://robu.in/product/3-2-inch-tft-lcd-screen-for-raspberry-pi/

Condition : The display’s touch feature is unable to function. Besides that, the product is entirely functioning.

This is all-new Version 3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi from waveshare is big (3.2″ diagonal) bright and colourful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.

As a bonus, this 3.2 Inch TFT LCD Screen for Raspberry Pi V4.0 display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. This display has a controller built into it with RAM buffering so that almost no work is done by the microcontroller.

This 3.2 Inch TFT LCD Screen display is an alternative solution for Raspberry Pi compatible HDMI display; the 3.2 inches Resistive TFT Touch Screen Display, which uses SPI Protocol (serial peripheral interface) to communicate with the main processor. It can be mounted directly to the GPIO pins and it doesn’t require any external power source.

In here we have a detailed explanation on how to install LCD drivers in a custom Raspbian image. The standard version of Raspbian does not include drivers for LCD touchscreens, so we will have to install and configure them manually.

Note: It is recommended to use a 5V 2A power adapter to power the raspberry dispatcher. Such as the use of PC’s USB interface to the raspberry power supply, may be due to lack of power supply raspberry can not cause normal start.

1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 22 NC NC
6, 9, 14, 20, 25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
12 KEY1 Key
13 RST Reset
15 LCD_RS LCD instruction control, Instruction/Data Register selection
16 KEY2 Key
18 KEY3 Key
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS Touch Panel chip selection, low active

Compatibility :
  1. Raspberry Pi Zero W v1.3 Development Board
  2. Raspberry Pi Zero v1.3 Development Board
  3. Latest Raspberry Pi 3 – Model B Original

Features :

  1. 320 × 240 resolution, support touch
  2. Compatible with any version of the raspberry pie
  3. Provide driver (can be used directly for custom Raspbian / Ubuntu system)
  4. And your raspberry pie as large (1 generation B + type, 2 generation B type and 3 generation type B)
  5. Comes with three buttons for easy application
  6. Shen Jin process, uncompromising attention to detail
  7. Designed for Raspberry Pi Model B/B+, easy to use
  8. Compatible with Raspberry Pi A+,B,B+/2.
  9. Supports Raspbian system, enables your system to:
  10. Play videos (supports multi formats, MP4 and so on)
  11. Take photos by touching
  12. Support software keyboard (system interaction without keyboard/mouse)
  13. With the Raspbian system, had to have the following features:1. Take pictures (17 kinds of camera mode)2.Support soft keyboard (from the mouse and keyboard can control the system)3.Surfing the Internet (your world created by you)

Useful link:

To do Hardware and Software setup, please follow this tutorial.

Package Includes :

1x 3.2 Inch TFT LCD Screen for Raspberry Pi

1x Resistive Screen Touch Pen/Stylus

1 x Standoff and Nut-Bolt set



Display Dimension


Shipping Weight 0.15 kg
Shipping Dimensions 10 × 6 × 3 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

4.0 overall

Be the first to review “Refurbished – 3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi”

There are no reviews yet.

Interfacing Details

DVD File

Libraries Installation for RPi

Raspberry Pi Image Installation Guides

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…