RepRap MK2B 3D printers Dual Power PCB Heat Bed

Availability:

Out of stock

Approx Restocking Date: 20th April, 2024
SKU: 12024
  1. 2 layer, 35μm copper
  2. Copper plated holes
  3. The resistance between 1.0 and 1.2 ohm
  4. Active heated area: 200 mm x 200 mm.
  5. 209 mm center-to-center mounting holes (outside the active area).
  6. Support 12V, 24V power.
  7. Double-sided, the other side is no wiring, heating uniformity, smooth printing.
  8. Regardless of the positive and negative terminal, you can free wiring.

 525.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Category: 3D Printer Heatbed Assembly
Tags: Heatbed, Heat Bed, Hot Plate, MK2B, Heatbed for 3D Printer, Dual Power PCB Heatbed

This RepRap MK2B 3D printers Dual Power PCB Heat Bed is compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed.

This RepRap MK2B 3D printers Dual Power PCB Heat bed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It features a central mounting hole on the front side to allow for three-point mounting. This is much easier for bed leveling in comparison to 4 point mounting.

First, level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity. Additionally, the solder pads have been greatly increased in size, making it much easier and allowing for the use of 1206 surface mount components. But this does not remove the need to use proper strain relief.

Connection:

12V connection: One cable connected to 1, another cable connected to a wire 2, 3 at the same time. At this time the resistance value of the two lines is 1.0 ~ 1.2Ω, the actual power is 144W.

24V connection: One cable connection 2, another line connected to 3 (1 unconnected), the resistance value of the two lines is 4.0Ω, actual power is 24 * 24/4 = 144W. The new version of the circuit, whether connected 12V or 24V, the power will stable at 144W.

Test Report:

12V connection: Current is 9.8A, as the temperature increases, the current drops to 8.8A (physical tips: resistance becomes larger as the temperature rises)
24V connection: The theoretical maximum current is less than 5A. 


Features :

  1. 2 layer, 35μm copper
  2. Copper plated holes
  3. The resistance between 1.0 and 1.2 ohm
  4. Active heated area: 200 mm x 200 mm.
  5. 209 mm center-to-center mounting holes (outside the active area).
  6. Support 12V, 24V power.
  7. Double-sided, the other side is no wiring, heating uniformity, smooth printing.
  8. Regardless of the positive and negative terminal, you can free wiring.

Package Includes :

1 x RepRap MK2B 3D printers Heat Bed

Item Type

Heat Bed

Size (mm):

214×214

Surface Type:

Copper Plated Holes

Material:

Copper

Input Supply Voltage (VDC)

12 ~ 24

Active Area (mm):

200×200

Color:

Red

Length (mm):

214

Width (mm):

214

Shipping Weight 0.21 kg
Shipping Dimensions 23 × 23 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “RepRap MK2B 3D printers Dual Power PCB Heat Bed”

There are no reviews yet.

Questions and answers of the customers

  1. 0 votes
    Q Is this heatbed with or without thermistor ?? answer now
    Asked by rs.mahra4546 on January 28, 2021 12:00 pm
    A no it is not... you have to buy separately or choo... Read more
Only registered users are eligible to enter questions
Country Of Origin: China