,

SKYRC S65 65W 6A AC Balance Charger Discharger for 2-4S Lipo Battery charger

(1 customer review)
Availability:

Out of stock

Approx Restocking Date: 31st March, 2024
SKU: 450693
  1. Input Voltage: AC 100-240V
  2. Charge Wattage: 65W
  3. Discharge Wattage: 10W
  4. Charge Current: 0.1A – 6.0A.
  5. Discharge Current: 0.1A – 2.0A.
  6. Balance Cells: 2 – 4 cells.

 

 

 3,799.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: SKYRC
Category: Battery Chargers, Ni-Mh | Li-po | Li-Ion Battery chargers
Tags: LIPO charger, Lipo Discharger, AC Power Charger, SKYRC Charger, battery chargers

SKYRC S65 65W 6A is an AC input high-performance microprocessor control charge/discharge station with battery management suitable for use with all current battery types, LiPo, LiIon, LiFe, NiCd, NiMH, PB, and also new generation LiHV with end voltage 4.35V. It is an AC input charger/discharger with a compact size. The maximum charging power of SKYRC S65 65W 6A with a maximum charging current of 6A and discharging current of 2A.

Explore the diverse range of batteries available Click here


Features:

  1. Embedded XT60 Battery Connector: By embedding the XT60 battery connector in the charger, it gets more convenient & safe for charging the most popular battery with XT60 connector and avoids the possibilities of reverse polarity for it.
  2. Battery Memory (Data Store/Load): The charger can store up to 10 different charge/discharge profiles for your convenience. You can keep the data pertaining to the program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
  3. AGM & Cold Charge Modes for PB Battery: SKYRC S65 65W 6A can charge AGM battery and also can be used for charging PB battery at very low temperatures.
  4. Smart & Efficient Cooling System: Temperature-controlled 7000rpm high-speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.
  5. Higher Accuracy with Three Decimals for Battery Voltage: The charger firmware is highly optimized by displaying the battery voltage with three decimals during the process of charging & battery voltage measuring.
  6. Temperature Threshold: If the temperature limit is reached, the process will be terminated.

Important Notice :

These warnings and safety notes are particularly important. Please follow the instructions for maximum safety, otherwise, the charger and the battery can be damaged or at worst it can cause a fire.

  1. Never leave the charger unattended when it is connected to its power supply. If any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the operation manual.
  2. Keep the charger well away from dust, dampness, rain, heat, direct sunshine and vibration. Never drop it.
  3. The allowable AC input voltage is 100 ~ 240V AC
  4. This charger and the battery should be put on a heat-resistant, non-inflammable and non-conductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from the operating area.
  5. Make sure you know the specifications of the battery to be charged or discharged to ensure it meets the requirements of this charger. If the program is set up incorrectly, the battery and charger may be damaged. It can cause fire or explosion due to overcharging
  6. Be very careful to choose the correct voltage for different types of batteries otherwise, you may cause damage to the batteries. Incorrect settings could cause the cells to fire or explode.

Package Includes : 

1 x SKYRC S65 65W 6A AC Balance Charger.
1 x AC Power Cord (EU plug).
1 x Instruction Manual.

Input Voltage (V AC)

100 ~ 240

Output Power(Watt)

65

Maximum Discharge Power (W)

10

Charge Current Range (A)

0.1 ~ 6

Dischage Current Range (A)

0.1 ~ 2.0

Trickle Charging Current

50mA – 300mA & OFF

Drain Current for Balancing Li-Po's (mA/Cell)

200

Li-ion/Po cell count

2 ~ 4

NiCd/NiMH cell count

6~8 S

Pb battery voltage

6 ~ 12

Dimensions in mm (LxWxH)

117 x 105 x 55

Weight (g):

315

Shipping Weight 0.45 kg
Shipping Dimensions 14 × 14.5 × 5.8 cm

 

 

6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. lionelpereira27 (verified owner)

    The best charger I could ever have.

    lionelpereira27

User Manual


Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…