SmartElex ATmega32 Development Board on-board Programmer

(5 customer reviews)
Availability:

In stock


SKU: 80650
  1. Onboard 5V regulator (78M05) circuit.
  2. On-Board power supply on-off switch
  3. Power Status LED (RED)
  4. User LED D0, D1 connected to any port pin through D0, D1 Jumper respectively.
  5. User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
  6. Onboard 12 MHz crystal
  7. Port extensions for all ports with detailed pin labeling for easy identification of pins
  8. Onboard USB TO Serial – CH340 Chip.
  9. On-board Micro USB USBASP for loading HEX file.
  10. Servo motor Connector (Run only up to 300mA).

 749.00

(inc GST)

₹ 634.75 (+18% GST extra)

In stock

Select below products to add together

30pcs Flexible Breadboard Jumper Wires ₹ 72
Micro USB Cable for Raspberry Pi ₹ 59
Male To Female Jumper Wires 40 Pcs 10cm ₹ 55

New Price: ₹ 749


Prices shown above are Inclusive of GST

Purchase this product now and earn 8 Robu Points!
Brand: SmartElex
Category: AVR Development Board
Tags: Development Board, SmartElex, Microcontroller, Robot Brain, ATmega32

The SmartElex ATmega32 Development Board can be used to evaluate and demonstrate the capabilities of AVR ATmega32 microcontroller. The MCU socket onboard provides support for 40 pin DIP package of AVR ATmega32 controller. This board designed for General Purpose application.

The ATMEGA Project Board is designed to work with ATMEGA 32. The ATMEGA 32 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It executes powerful instructions in a single clock cycle and achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption

Board has onboard power supply circuit, Micro USB for USBASP programmer, Micro USB port for serial communication with the computer and another serial device, power status LED (RED), Reset switch, Two User switch, Two User LED, and port extensions for all 4 ports.    You can power the Board through the DC plug-in jack. The onboard power regulator can handle anything from 9 to 12VDC.

Pin Description:

pin Description

 


Features:

  1. Onboard 5V regulator (78M05) circuit.
  2. On-Board power supply on-off switch
  3. Power Status LED (RED)
  4. User LED D0, D1 connected to any port pin through D0, D1 Jumper respectively.
  5. User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
  6. Onboard 12 MHz crystal
  7. Port extensions for all ports with detailed pin labeling for easy identification of pins
  8. Onboard USB TO Serial – CH340 Chip.
  9. On-board Micro USB USBASP for loading HEX file.
  10. Onboard 16×2 LCD Display Connector.
  11. Servo motor Connector (Run only up to 300mA).
  12. 12V, 5V and GND bus provided for external peripheral.
  13. Four 3mm mounting holes for easy mounting

Useful Links :
  1. Atmel Studio 6.0
  2. Avrdudess – A Gui For Avrdude

Package Includes:

1 x SmartElex ATmega32 Development Board

Architecture

Advanced RISC Architecture

Clock Speed

12 MHz

Color

Black

EEPROM

1024Bytes

Flash Memory

32 KB

Input Voltage(Recommended)

12V

Microcontroller

ATMEGA32A

Operating Voltage (VDC)

9 ~ 12

PWM Output Pins

4

SRAM (KB)

2

Weight (gm)

41

Dimensions (mm) LxWxH

100 x 61 x 15

Shipment Weight

0.043 kg

Shipment Dimensions

12 × 8 × 4 cm

6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 5 reviews

4.8 overall
4
1
0
0
0

Add a review

  1. jaybsoni28 (verified owner)

    Driver identification error on my computer but works on other computer. But still good.. Suggest any idea for error solving pls..

    jaybsoni28

  2. nishan Chettri

    Good VALUE FOR MONEY. Easy to program and use.

    nishan Chettri

  3. Fazil Mohammad (verified owner)

    Well, I found out that there was problem in my computer while identifying driver. But it works on other computer. So, 5 stars now for the quality and specs.

    Fazil Mohammad

  4. Fazil

    Please provide Driver for inbuilt programmer

    Fazil

  5. ARUMUAM V P (verified owner)

    Super

    ARUMUAM V P

Datasheet

16x2 LCD Interface with SmartElex ATmega32 Development Board

Questions and answers of the customers

  1. 0 votes
    A

    it requires normal USB drivers

  2. 0 votes
    There are no answers for this question yet. Answer now
  3. 0 votes
    A Yes you can use Atmel Studio IDE to write code and... Read more
  4. 0 votes
  5. 0 votes
Only registered users are eligible to enter questions

You may also like…